Things to do Before Sierra fest

[NorCalChris]

1. swap out dana 30 for a straight one
2. rebuild and revalve my Bilstein 7100s
3. install adj ucas
4. find the configuration that had the longest stock front drive shaft...and get two shafts
5. install sye
6. relocate the shock mounts on my d44
7. install some shackle relocators
8. weld in new rockers
9. fix my hood latch
10. fix my pass rear door , i need a new handle and internal assembly
11. maybe make some half doors?
12. mount an antenna and run wire to my cb
13. mount my power converter somewhere
14. run a 12v supply to the rear of my jeep for my cooler
15. install some more tie downs in the rear cargo area
16. make a new prop for my hatch
17. put my dash back together
18. clean the inside of my jeep
19. service the engine, tranny, fill my case, and f/r diffs
20. mount my two spare tires on rims
21. find more stuff to fix........
22. find more stuff to fix
23. and last but not least............become a naxja member

 

[SeansXJ]

sounds good.......

 

[NorCalChris]

yea.....priced out some steel for the rockers. gonna come out to 170ish for all the steel.

 

[SeansXJ]

20' stick?

 

[Jeep450r]

Are you still interested in my rims? Ive been too lazy to throw them back on craigslist so they're still here.

$170 for the steel? Are you cutting out and replacing your rockers? 3/16? Ive been needing to price this out as well.

 

[NorCalChris]

yea. i priced out a 20ft stick of 3x4x3/16th and a 20 ft stick of 1.5x.120 tube. and yes to cut them out. I am interested in them, my problem, i have 6 tires, so i need six matching rims. rims arnt on the list, because i have rims. im really looking for some 15x8 alloy rims, not 15x10.

 

[SeansXJ]

i already told you i got you Chris. when you have 120 i have 2 brand new rims for you.

btw for the price difference just go with the 1/4"

 

[NorCalChris]

im just waiting til we do your rockers first then i can learn what not to do and continue with mine. lol and yea i am gonna go with 1/4in. it was like a 20 dollar difference. just got to figure out how im gonna pick them up. its either my xj, or my explorer. haha.

 

[NorCalChris]

and with the rims id like to find used ones just so they match, but who knows, i might just get them all muddy and just wash the tire off. haha.

 

[SeansXJ]

just have them cut the stick in half on throw it on the roof.

 

[NorCalChris]

thats what i was thinking. so when we doing your rockers? haha

 

[SeansXJ]

gotta get my new coils in and the arms done and installed, also need to put these axles in. speaking of axles, my old 30 will be looking for a new home = the short shaft and bearings. the control arm control arm mounts will need some tweaking but there good. shoot me a PM if your interested.

oh yeah i can give you that shaft back too!!

 

[NorCalChris]

sweet. its odd carrying one spare front shaft with you. lol. jk

 

[rocknxj]

Did you ever get those hooks installed? You'll need recovery points.