THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread aka North America Home Owners Association Thread

cmelo said:
YO, if you have one of those cyber insurance companies how do you like register a car and shit and whatnot. I pay like $800 a year but I go to someplace in my town and I can give them $20 and they go to the RMV for me.



PIZZA
Click to expand...

You call them, they do the work and send you a form. You bring it to the DMV.
 
Re: THe NAC Lots-O-Post Thread aka North America Home Owners Association Thread

CTeunuch said:
Shit fool if this thing is getting a new frame you best believe it's getting SAS'd and linked!
Click to expand...

It better be Done by Billy, cause we know how your work is
 
THe NAC Lots-O-Post Thread aka North America Home Owners Association Thread

CTeunuch said:
I had to replace a bearing in the front diff of the taco today. I thought I bought a new vehicle so I didn't have to work on it in the cold...
Click to expand...


Yikes, so much for that OEM Toyota quality. What part? My power steering low pressure lines (yea, there's two) are leaking all over.
 
Re: THe NAC Lots-O-Post Thread aka North America Home Owners Association Thread

XJLI said:
Yikes, so much for that OEM Toyota quality. What part? My power steering low pressure lines (yea, there's two) are leaking all over.
Click to expand...

there quality has gone down the past 10 years, the yaris and corolla my mom had both had issues at low miles
 
Re: THe NAC Lots-O-Post Thread aka North America Home Owners Association Thread

Buying a oilpan skid for the jeep this week
 
Re: THe NAC Lots-O-Post Thread aka North America Home Owners Association Thread

XJLI said:
Yikes, so much for that OEM Toyota quality. What part? My power steering low pressure lines (yea, there's two) are leaking all over.
Click to expand...

There's a needle bearing that supports the CV shaft where it comes out of the diff on the drivers side that's notorious for failing/causing vibes at highway speeds. I replaced it with an upgraded, wider bushing(instead of another bearing with moving parts that can/will fail) from ECGS and it seems to have done the trick. I replaced the CV shaft too, it wasn't bad,but at 102k I'd feel like a jackass doing all that work to get it out and have the old one fail in a few months. All in all with seals and everything it was about $200, and only took about 4 hours.
 
Re: THe NAC Lots-O-Post Thread aka North America Home Owners Association Thread

CTeunuch said:
There's a needle bearing that supports the CV shaft where it comes out of the diff on the drivers side that's notorious for failing/causing vibes at highway speeds. I replaced it with an upgraded, wider bushing(instead of another bearing with moving parts that can/will fail) from ECGS and it seems to have done the trick. I replaced the CV shaft too, it wasn't bad,but at 102k I'd feel like a jackass doing all that work to get it out and have the old one fail in a few months. All in all with seals and everything it was about $200, and only took about 4 hours.
Click to expand...

That isn't bad, still shitty though.
 
Re: THe NAC Lots-O-Post Thread aka North America Home Owners Association Thread

Yeah that's not bad at all.

One of my hella 80/100s already shit the bed. Did their quality go down or something? The ones in my old XJ lasted 2 years without a problem.

Debating buying another one or just throwing the 55/65s that came with the headlights in.
 
Re: THe NAC Lots-O-Post Thread aka North America Home Owners Association Thread

DDM tuning hids kid
 
Re: THe NAC Lots-O-Post Thread aka North America Home Owners Association Thread

MoparManiac said:
Yeah that's not bad at all.

One of my hella 80/100s already shit the bed. Did their quality go down or something? The ones in my old XJ lasted 2 years without a problem.

Debating buying another one or just throwing the 55/65s that came with the headlights in.
Click to expand...

I've tried a bunch of different bulbs. There's a reason I only buy the Osram 70/65s.
 
Re: THe NAC Lots-O-Post Thread aka North America Home Owners Association Thread

Who's Bill gonna wheel with now?
 
You must log in or register to reply here.

Similar threads

R
Congratulations to our new Leadership!
Replies
2
Views
260
STROKER
STROKER
B
Looking for an passenger side OFFSET tie rod, 7/8-18 left hand thread offset to front of vehicle,
Replies
13
Views
353
Evan03
E
SAMSET
Check out the MWC Store on Breasy Things
Replies
2
Views
246
lesslimited
lesslimited
Bent
The BEST Medicine
Replies
7
Views
301
Nimrod
Nimrod
Jeepguy91
MWC election - Nominations for MWC Director at Large
Replies
3
Views
225
REWSTER
REWSTER
Back
Top