THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

P.S. Why is my flight to St. Louis from Charlotte composed of ~80% black people?

Not that there's anything wrong with that, but it'd be better if they weren't all fat women...
 
Re: THe NAC Lots-O-Post Thread

Time approved off for nacfest and for the crawl in KY the following week. Need it to be the end of the month already
Sweet. Did you register yet? Only 3 days to go!
P.S. Why is my flight to St. Louis from Charlotte composed of ~80% black people?

Not that there's anything wrong with that, but it'd be better if they weren't all fat women...

Chris the casual rasist and cacomorphobic.
 
Re: THe NAC Lots-O-Post Thread

Ken, I twisted the splines on a stock shaft after two runs on the 35s. I bought chromos for it to get the bolt pattern to match the hp44 front.

For mild wheeling he should be fine.
 
Re: THe NAC Lots-O-Post Thread

Wonder if I could get away with using fuel injection hose, none of the stock lines have clamps, are these just low pressure lines?
 
Re: THe NAC Lots-O-Post Thread

Not that there's anything wrong with that

Screen_Shot_2013-06-07_at_12.33.20_PM-240x180.png
 
THe NAC Lots-O-Post Thread

Ken, I twisted the splines on a stock shaft after two runs on the 35s. I bought chromos for it to get the bolt pattern to match the hp44 front.

For mild wheeling he should be fine.

Debating chromo shafts for my 8.25 I don't really see a point at the moment. But is there any reason I should not drill stock 8.25 shafts to the 5x5.5 pattern if I use a jig?
 
Re: THe NAC Lots-O-Post Thread

Chris the casual rasist and cacomorphobic.

-2 points for poor spelling, +2 points for using a word I did not know.

And yes, I think that stems from being small and vulnerable. :helpme:

St. Louis is cool so far, went to a Brazilian steakhouse for dinner. About to walk over to a Buffalo Wild Wings because I'm bored, unless the hotel bar is still open.

Then my meeting tomorrow with the manufacturers of this death machine...
 
Re: THe NAC Lots-O-Post Thread

P.S. Wtf is up with bringing a pet on board in some kinda carryon bag? My flight is delayed by at least a half hour and this woman has a cat in a mesh bag. I can only imagine how long that thing can go without pissing or shitting. And apparently it only has 3 legs.

Pretty sure she's nowhere near me but she's done a good job of creating a radius of about 3 seats around her in the waiting area. Flight is only 2 hours but goddamn if I wanna spend it sitting next to a caged cat that's been immobile for a few hours already.

Do they send that thing through the x-ray scanners too? :confused:

This person ended up on a different flight than me. To Chicago, which is actually an hour longer.

My questions still remain unanswered. Instead I ended up in the middle seat next to a woman holding an infant, which kept kicking me in the knee the whole flight, but somehow I don't have the same animosity towards that vs. a feline in the next seat over. At least it didn't cry or poop.
 
Re: THe NAC Lots-O-Post Thread

This person ended up on a different flight than me. To Chicago, which is actually an hour longer.

My questions still remain unanswered. Instead I ended up in the middle seat next to a woman holding an infant, which kept kicking me in the knee the whole flight, but somehow I don't have the same animosity towards that vs. a feline in the next seat over. At least it didn't cry or poop.

I was next to an infant on a flight new kept falling asleep and leaning on me. He also pooped...

Also in Charlotte I saw a woman lay down some newspaper on the carpet in the terminal so her dog could pee and poop. Just. Newspaper.
 
Re: THe NAC Lots-O-Post Thread

Sweet. Did you register yet? Only 3 days to go!

Already registered for Nacfest. Knew I would have off Saturday either way. But got Friday off also. Now I'll be there Friday afternoon instead of night or way early Saturday.
 
Re: THe NAC Lots-O-Post Thread

Wonder if I could get away with using fuel injection hose, none of the stock lines have clamps, are these just low pressure lines?

Are you talking about for your IDI?

If you're replacing any line before the lift pump, just make sure it's vacuum rated so it doesn't collapse.

After that, it should be all low pressure until the injection pump. My lift pump only runs around 15-16 PSI.
 
Re: THe NAC Lots-O-Post Thread

-2 points for poor spelling, +2 points for using a word I did not know.

And yes, I think that stems from being small and vulnerable. :helpme:

St. Louis is cool so far, went to a Brazilian steakhouse for dinner. About to walk over to a Buffalo Wild Wings because I'm bored, unless the hotel bar is still open.

Then my meeting tomorrow with the manufacturers of this death machine...
:laugh:
Rasist the lover of raspberries? :doh:

There must be a better place than Wild Wings.

Already registered for Nacfest. Knew I would have off Saturday either way. But got Friday off also. Now I'll be there Friday afternoon instead of night or way early Saturday.
I can't remember who did and didn't.
I am going to run through the list later.
 
Re: THe NAC Lots-O-Post Thread

Are you talking about for your IDI?

If you're replacing any line before the lift pump, just make sure it's vacuum rated so it doesn't collapse.

After that, it should be all low pressure until the injection pump. My lift pump only runs around 15-16 PSI.
Yeah factory its like 4ft of hard line with some sort of plastic/rubber soft lines slipped over without clamps. Regardless none of it is available not even dealer
 
Back
Top