foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
THe NAC Lots-O-BFG KO2 Thread
- Thread starter ROBZ95Xj
- Start date
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
I have done city driving with the 5 ton in Worcester, Pittsburgh, and Hudson. Pittsburgh had some really narrow streets and some construction zones and my GPS took me through Kelley Square with it in Worcester... yeah people just slammed on their brakes and let me go where I wanted :scottm:
I wouldn't want to do city driving in a truck that can take body damage though. Between the sheer intimidation factor and the bulletproof body on the 5 ton city driving really isn't that bad.
Thanks, but I'm trying to go the other direction, and just not sure if the trans in a 95 is an AX15 or an AX5 or what, and what I have to swap to make it work with a 6cyl.
I have done city driving with the 5 ton in Worcester, Pittsburgh, and Hudson. Pittsburgh had some really narrow streets and some construction zones and my GPS took me through Kelley Square with it in Worcester... yeah people just slammed on their brakes and let me go where I wanted :scottm:
I wouldn't want to do city driving in a truck that can take body damage though. Between the sheer intimidation factor and the bulletproof body on the 5 ton city driving really isn't that bad.
Dundy
NAXJA Forum User
- Location
- Taunton, MA
Re: THe NAC Lots-O-Post Thread
Sure. The drop brackets and D30 were the only things that i'm worried about. Now the DB's are gone and the D30 is still in one piece after Fall Crawl so i'm more confident in it now that it's open.
I duno how many times you've seen me wheel but it's nothing like Colin, Chris, Sam, etc. Don't expect insane full throttle assaults, especially 400 miles from home. When I wheel closer to home i'm more throttle friendly.
Why don't you fix your Jeep and "wheel" it?
Sure. The drop brackets and D30 were the only things that i'm worried about. Now the DB's are gone and the D30 is still in one piece after Fall Crawl so i'm more confident in it now that it's open.
I duno how many times you've seen me wheel but it's nothing like Colin, Chris, Sam, etc. Don't expect insane full throttle assaults, especially 400 miles from home. When I wheel closer to home i'm more throttle friendly.
Why don't you fix your Jeep and "wheel" it?
billyjp2
NAXJA Forum User
- Location
- Indian Orchard MA
rweaver138
NAXJA Forum User
- Location
- Brooklyn, CT
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
Wow, that was kinda scary. Found out the issue with my pinion, turns out the crush sleeve wasnt starting to crush. I had to max out my 20Ton press before the sleeve started to crush, the hyrdo line for the ram started to weep and the pressure gauge was going into the red.
Wow, that was kinda scary. Found out the issue with my pinion, turns out the crush sleeve wasnt starting to crush. I had to max out my 20Ton press before the sleeve started to crush, the hyrdo line for the ram started to weep and the pressure gauge was going into the red.
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
But 14 bolts are so much easier to regear, why is it taking you so long?
But 14 bolts are so much easier to regear, why is it taking you so long?
Dundy
NAXJA Forum User
- Location
- Taunton, MA
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
Cause I have no idea what Im doing!!
I was actually on the right track yesterday, I just didnt keep apply more force to the pinion bearings because I thought something was wrong and binding. After double checking everything, I found I just needed to press the sleeve more.
Cause I have no idea what Im doing!!
I was actually on the right track yesterday, I just didnt keep apply more force to the pinion bearings because I thought something was wrong and binding. After double checking everything, I found I just needed to press the sleeve more.
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
So...why aren't you done yet then?
So...why aren't you done yet then?
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
this just in. Ross was afraid to apply more force to something AND IT WAS THE RIGHT THING TO DO.
this just in. Ross was afraid to apply more force to something AND IT WAS THE RIGHT THING TO DO.
rweaver138
NAXJA Forum User
- Location
- Brooklyn, CT
Re: THe NAC Lots-O-Post Thread
This Jeep is really starting to piss me off, now my damn hatch wont open.
This Jeep is really starting to piss me off, now my damn hatch wont open.
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
Fold down rear seat, move entire toolbox foward, yank off hatch trim cover, pull little rod inside, hatch opens.
Fold down rear seat, move entire toolbox foward, yank off hatch trim cover, pull little rod inside, hatch opens.
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
Boner.
I've driven the Honcho in through the city plenty of times. It's gay, but better than driving a mini cooper, anywhere.
Here, look at these.
Original build sheet. It was under the carpet on the passenger floor
Closer look
BAM!
BAM!
I just need to paint the 2x6, clean up some wiring in the interior, and re-install the carpet, seats, etc. and she's done.
Boner.
I've driven the Honcho in through the city plenty of times. It's gay, but better than driving a mini cooper, anywhere.
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
Drive downtown, like down huntington ave towards fanueil hall.
Drive downtown, like down huntington ave towards fanueil hall.
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
I have no idea where I am when I'm in Boston. I didn't mean just to my dad's shop when I said I've done it though, my dad's shop doesn't count. I've had it in small congested roads a little bit in the more northern part and in the Wentworth area.
I have no idea where I am when I'm in Boston. I didn't mean just to my dad's shop when I said I've done it though, my dad's shop doesn't count. I've had it in small congested roads a little bit in the more northern part and in the Wentworth area.
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
I'd be lying if i said I knew what fanueil hall actually is. Is it that place with all the restaurants? Don't answer, I don't care.
I'd be lying if i said I knew what fanueil hall actually is. Is it that place with all the restaurants? Don't answer, I don't care.
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
Read my text faggot.
Read my text faggot.
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
I wish I had today off. I would love to lay back down for another couple hours of sleep and then melt some metal later in the day.
I got a text from my kid brother this morning that he was coming home from camping and is locked out of the house. I'm tempted to email my boss that I need to go work from home for the afternoon so I can let him in even though my father should be home soon and can unlock the house.
I wish I had today off. I would love to lay back down for another couple hours of sleep and then melt some metal later in the day.
I got a text from my kid brother this morning that he was coming home from camping and is locked out of the house. I'm tempted to email my boss that I need to go work from home for the afternoon so I can let him in even though my father should be home soon and can unlock the house.
- Location
- Rainy side of Washington
Re: THe NAC Lots-O-Post Thread
happened to me, try pushing in and up really hard on the sheetmetal about 8 inches to the right of the handle while opening it. Then pull the trim and adjust the rod Ross mentioned. I can't believe I let that bother me for a year before fixing it.
Similar threads
