THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

i left the pins in and just replaced the plastic thingy, hack i didnt even replace the lower bearing, o well, no off to weld up mid stiffner, sheetmatal can go suck a dick
 
Re: THe NAC Lots-O-Post Thread

i left the pins in and just replaced the plastic thingy, hack i didnt even replace the lower bearing, o well, no off to weld up mid stiffner, sheetmatal can go suck a dick
If mine were any good I'd have done the same.
 
Re: THe NAC Lots-O-Post Thread

Be careful, he might hear you, this is the internet after all. You might make an ass out of yourself.

he knows how i feel.

and ever try to search for something in a thread with 80,000 replies?

maybe im doing it wrong, but it s's the d
 
Re: THe NAC Lots-O-Post Thread

Haha, I was being facetious. I was saying that because I got a PM from him trying to flame me one time after posting a link to his original build thread. He told me I must have forgot I was on the internet, which is public, and I made an ass out of myself. I politely pointed out to him where he only succeeded in making an ass out of himself, and I was well aware of where I was.
 
Re: THe NAC Lots-O-Post Thread

I have so many one dollar bills...I'm adding a zero to all of em make em look like 10 and gonna trick lady at Dunkin Donuts tomorrow!!!...Cause I'm a Thug
 
Re: THe NAC Lots-O-Post Thread

not sure how my welds are on the stiffners, they will prob fall off on the first rock the hit, o well, then ill just scrap this jeep and build a grand wagoneer
 
Re: THe NAC Lots-O-Post Thread

Add some powdercoating or chrome so they stay on
 
Re: THe NAC Lots-O-Post Thread

that bad?
just a bit fustrated, some welds do awsome others suck and i blow through the shhetmetel like crazy, never did lower the power settings though, may be i should of tried that, o well
 
Re: THe NAC Lots-O-Post Thread

i do mine with my 140 cranked all the way up. just concentrate the gun on the stiffys and pull it over to the unibody
 
Re: THe NAC Lots-O-Post Thread

I have so many one dollar bills...I'm adding a zero to all of em make em look like 10 and gonna trick lady at Dunkin Donuts tomorrow!!!...Cause I'm a Thug

Begley_Jamaica_0274.jpg


They are known as "J's." Its Jamaica, of course their currency would be "J's."
 
Re: THe NAC Lots-O-Post Thread

Begley_Jamaica_0274.jpg


They are known as "J's." Its Jamaica, of course their currency would be known as "J's."

No one on earth cares about any other money other than american currency.
 
Re: THe NAC Lots-O-Post Thread

Why not just weld something to the kingpin and use the added heat to break it free? That's Billy style. Or ask Anthony or Bill.
I actually did that to the second one because the cheesy tool I made rounded out.

For getting them out, heat with torch, weld something to the kingpin and put pipe on wrench. You'll need something a little more sophisticated to get them torqued in.
 
Re: THe NAC Lots-O-Post Thread

hell yeah, i really miss my old grand waggy, minus the 5mpg's and 727tf that made all of kens vechicles look clean

Hey now, the 98 and m54a2 only have cosmetic rust :roflmao:
 
Re: THe NAC Lots-O-Post Thread

Hey now, the 98 and m54a2 only have cosmetic rust :roflmao:
i was talking fluid leakage aperently 727's do not like it when to go from D to R alot to get unstuck in a mudhole
 
Re: THe NAC Lots-O-Post Thread

No one on earth cares about any other money other than american currency.

I will agree. The Jamaicans even didn't want their own money. We made the mistake of exchanging money at the airport, when we got to the hotel they all laughed at us. Everyone everywhere wanted USD's.
 
Back
Top