THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

Ox.
 
Re: THe NAC Lots-O-Post Thread

how long shall a 80 cu ft tank last? i will be doin a shitload of welding this weekend, goal is to use up every inch of 1x1 i have
 
Re: THe NAC Lots-O-Post Thread

Hope I didnt miss anything, should be everything else I need for my 60 aside from the gears/install kit I already have.



1. Chromo D60 front shafts, preferably Ten Factory
-(1) 15.96" inner & (2) 11.4" outers (85-88 Ford HP60)
-(1) 32.06" custom length inner (impossible to find OEM Spicer shaft #660182-26)
2. 300M u-joints, preferably Longfields
3. 35 spline drive flanges
4. D60 35 spline Spartan locker
5. Inner/outer wheel bearing/seal kit, both sides
6. Spindle bearing/seal kit, both sides
7. Complete lower kingpin rebuild kits, both sides
8. Lower kingpin caps, both sides
9. Upper kingpin seals, both sides
10. Inner axle seals, both sides
11. Pair of your high steer arms
-5 hole with 5 ARP studs/nuts per side (you also included new kingpin cone bushings, correct?)
-Milled flat & drilled for 3/4" hole and correct length for hydro assist ram (8" throw I believe, seems to be the normal size for 60's)
 
Re: THe NAC Lots-O-Post Thread

how long shall a 80 cu ft tank last? i will be doin a shitload of welding this weekend, goal is to use up every inch of 1x1 i have

I did almost all my stiffeners on like a quarter of a bottle I think. I started with like 600PSI and came up like a foot of weld short.
 
Re: THe NAC Lots-O-Post Thread

So that picture of the kid shooting himself in the face with sparks was selected to be in some art show.
 
Re: THe NAC Lots-O-Post Thread

heres my blue print of my floor plans, things arnt fully corect but you can get the idea, like ther will be like 5" of floor between frame and trans tunnel

1x1_usage.jpg


Green=frame
black=1x1
silver=sheetmatal
 
Re: THe NAC Lots-O-Post Thread

So that picture of the kid shooting himself in the face with sparks was selected to be in some art show.
Badass dude, it is a pretty good shot.
 
Re: THe NAC Lots-O-Post Thread

'grats on the picture Mark.

My headphones came... and so did I when I started listening to them. Puts every other headphone I've ever listened to to shame. They fit like earplugs, but have a speaker. (actually 3)...
 
Re: THe NAC Lots-O-Post Thread

Bets on how long the driver side mirror I just put on lasts? I had to use the universal persuasion mallet to get the door back into the right shape, its probably the last one that will go on without selftappers and duct tape...
 
Re: THe NAC Lots-O-Post Thread

What headphones did you end up getting Anthony?
 
Re: THe NAC Lots-O-Post Thread

how long shall a 80 cu ft tank last? i will be doin a shitload of welding this weekend, goal is to use up every inch of 1x1 i have

What's your flow at?

Mine's at 15 (insert correct units here) and it lasts quite a long time.

Granted my tank only gets filled to 1600-1800 PSI.
 
Re: THe NAC Lots-O-Post Thread

Holy XXXX $200???
I'd buy them again in a heartbeat. They have replaceable cables. And that's the part I usually break. I've never broken a speaker itself. So I'd rather buy these and get a $30 replacement cable in a year and a half maybe than have to buy a new pair of $100 headphones in the same time.
 
Back
Top