THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

Depending on how long homework takes tomorrow night, I'll probably end up going to the 99 after.

You down Ross? I can bring your cash for the tubing.
 
Re: THe NAC Lots-O-Post Thread

vetteboy said:
C'mon man, haven't you learned anything from the crap we've given Anthony?

We don't care about your excuses, but more importantly, neither does NACFest.

:D
Click to expand...

Bitch I WILL be there with my MJ. I don't care how much stuff I have to half-ass. :D

I still think I'm on target. I hope to have the trackbar done before the weekend so that on Saturday I can finish boxing the UCA mount and then set the front down on your lame ass 6.5" coils and see where that puts me.
 
Re: THe NAC Lots-O-Post Thread

I actually dreamt I was driving it last night and it was done.

And I was completely amazed that my wiring harness worked, and that the NP435 shifted perfectly smooth.

Yep, definitely a dream :laugh:
 
Re: THe NAC Lots-O-Post Thread

mini=man said:
The problem is, it's Market Basket. As everyone know, unless you're high in the food chain the job sucks and you get shit on on a daily basis. My store manager LOVES me and wants me to work with the MB's HVAC crew when I graduate with my HVAC degree. Those guys make stupid money and actually get treated fairly well from the ones I have talked to. I've been there for six years and really don't want to stick my foot in my mouth or burn any bridges on my way out.
Click to expand...
That sounds like it could be a pretty good gig. Are you trying to get into that group when you get your degree?
JrTxJ said:
Anthony & anybody that enjoys a good beer, and that travels up north by n. conway, nh: http://www.ebenezerspub.net/ <--- can't wait to go there in 2 weekends. rated best beer bar in the world
Click to expand...
I'll have to check that out. I'll be 15 mins from there this weekend. Thanks for the tip.
 
Re: THe NAC Lots-O-Post Thread

Yay, getting ready to going to go sell this spare transfercase, and I'm happy that I don't immediately have to take the money and walk into best buy and buy a new mp3 player.
 
Re: THe NAC Lots-O-Post Thread

foxwar71 said:
Stupid ball joints on red jeep are keeping me from black jeep. I got pissed off yesterday and ended up torching the bj's off. I mighta also gotten very pissy and torched a knuckle, good thing I had a couple more.
Click to expand...
Wow, never had that much trouble with balljoints. Why would torching anything even help?

Begster said:
Yay, getting ready to going to go sell this spare transfercase, and I'm happy that I don't immediately have to take the money and walk into best buy and buy a new mp3 player.
Click to expand...
What night should I show up? Tonight? Thursday? Friday?

Wednesday I'm probably in Haverhill fixing the brakes and assorted drivetrain stuff on a ZJ so I can't really meet then.
 
Re: THe NAC Lots-O-Post Thread

kastein said:
Wow, never had that much trouble with balljoints. Why would torching anything even help?
Click to expand...
Heat. It's amazing how easy most jobs become when you heat everything up a bit.
 
Re: THe NAC Lots-O-Post Thread

asp said:
Heat. It's amazing how easy most jobs become when you heat everything up a bit.
Click to expand...
To the point that it would destroy a knuckle? :dunno:

I didn't have to use heat to do the balljoints on the MJ, just put the press on them and turned it. Tapped it with a hammer a couple times and they popped.
 
Re: THe NAC Lots-O-Post Thread

That makes sense.

Guess I got lucky on mine, the studs didn't spin. I was extremely careful to not break either one free from the knuckle till the nuts were both off. I would have been real pissed if they had come loose and left me spinning... this is why I chipped the rust off the threads and removed the cotter pin instead of just letting it get sheared by the nut.
 
Re: THe NAC Lots-O-Post Thread

Begster said:
Ken, tonight might work, what time would you be over here?
Click to expand...
probably 6-7 or so, depending on traffic. I have no intention of staying late at work tonight.
 
Re: THe NAC Lots-O-Post Thread

asp said:
That sounds like it could be a pretty good gig. Are you trying to get into that group when you get your degree?
Click to expand...
Not really, I don't really like refrigeration and I'm also not keen on working commercial sized units, especially in the winter and summer on a rooftop. But the way I'm looking at it right now, is my foot is in the door and I'd be making a ton more money while I'm still young. When I start getting older and can't handle the elements as well, I'll switch to residential and do what I really want to do.
 
Re: THe NAC Lots-O-Post Thread

hopefully i can get something done to the jeep this weekend. either mm's or the shackle brackets. if its a good weekend maybe both!

and, my coffee made me feel dizzy this morning, weird.
 
Re: THe NAC Lots-O-Post Thread

Oh Chris, maybe you can answer this.

Heretic Fab links are $165 a pop with tube adapters (So basically $350 after shipping) for 2 OD x .250 w 4130 heat treated.

I could get 2.25 OD x .375 w regular DOM for ~$140 shipped instead.

What would Jesus do?
 
You must log in or register to reply here.

Similar threads

R
Congratulations to our new Leadership!
Replies
2
Views
166
STROKER
STROKER
B
Looking for an passenger side OFFSET tie rod, 7/8-18 left hand thread offset to front of vehicle,
Replies
13
Views
254
Evan03
E
SAMSET
Check out the MWC Store on Breasy Things
Replies
2
Views
161
lesslimited
lesslimited
Bent
The BEST Medicine
Replies
7
Views
198
Nimrod
Nimrod
Jeepguy91
MWC election - Nominations for MWC Director at Large
Replies
3
Views
135
REWSTER
REWSTER
Back
Top