THe NAC Lots-O-BFG KO2 Thread

[foxwar71]

Re: THe NAC Lots-O-Post Thread

probly Wyoming.,.....where the buffalo live

Im gay for buffalo.

 

[5spd_xj]

Re: THe NAC Lots-O-Post Thread

"no law about carrying" is a bit of a stretch you still need a permit to carry concealed in Wyoming. Open carry there's no permit required, but iirc that's the same as NH, so who really gives a shit about Wyoming?

 

[Dundy]

Re: THe NAC Lots-O-Post Thread

burned.

 

[mini=man]

Re: THe NAC Lots-O-Post Thread

"no law about carrying" is a bit of a stretch you still need a permit to carry concealed in Wyoming. Open carry there's no permit required, but iirc that's the same as NH, so who really gives a shit about Wyoming?

This. And up untill a few years ago walmart in NH sold guns too. STFU

 

[mini=man]

Re: THe NAC Lots-O-Post Thread

Bang

 

[5spd_xj]

Re: THe NAC Lots-O-Post Thread

Bang

fixed!!

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

The logic makes sense, very rarely will the rotor not seat perfectly on the hub. Ive changed rotors on a couple trucks that required pressing the studs in and such, never had a problem.

Any reason you didnt just buy the rotors and do it yourself? If its just because you dont have press, you do know me remember

First I had heard of it, but hes been doing it since before I was born so I trust him.

He doesn't charge me anything to do it. If he does, it's very cheap so I don't care.

Drop them off, pick them up all done on Monday. Gonna get some rust prohibiting spray from him too so they don't rust since they won't be used for a while.

 

[RCman]

Re: THe NAC Lots-O-Post Thread

First I had heard of it, but hes been doing it since before I was born so I trust him.

He doesn't charge me anything to do it. If he does, it's very cheap so I don't care.

Drop them off, pick them up all done on Monday. Gonna get some rust prohibiting spray from him too so they don't rust since they won't be used for a while.

Really that is the first you've heard of it? Odd. You city folks need to get out more.
I don't think it matters on your MJ, but it might on a pickup with low quality rotors.

I'm with Ross and not sure why you just didn't take the 20 min and do it yourself? I didn't use a press, just a brass punch and a hammer. Races and studs in under half and hour. My bet is you wasted more time driving back and forth than that!

 

[ktm racer 419]

Re: THe NAC Lots-O-Post Thread

employee rate/discount/connection to get it for dirt cheap

ummmm

party?

 

[kastein]

Re: THe NAC Lots-O-Post Thread

The temptation to get this dana 60 even though it has balljoints and a short driver side tube is amazing... esp seeing as I can get it for 150 or so all told.

Also, I just realized I have bugged colin to ask him stupid axle questions on christmas eve twice in a row now (last time it was about a d30 with 4.10s and a detroit.) Hopefully I will either be asking him stupid questions about dana 120 axles next christmas or will have no stupid questions left to ask.

 

[Dundy]

Re: THe NAC Lots-O-Post Thread

My bet is you wasted more time driving back and forth than that!

PSH!

 

[ktm racer 419]

Re: THe NAC Lots-O-Post Thread

The temptation to get this dana 60 even though it has balljoints and a short driver side tube is amazing... esp seeing as I can get it for 150 or so all told.

Also, I just realized I have bugged colin to ask him stupid axle questions on christmas eve twice in a row now (last time it was about a d30 with 4.10s and a detroit.) Hopefully I will either be asking him stupid questions about dana 120 axles next christmas or will have no stupid questions left to ask.

why the eff do people even factor in ball joints vs kingpins on a $150 d60?

 

[kastein]

Re: THe NAC Lots-O-Post Thread

Yeah, I can live with balljoints no problem. I may have to harass ross into welding my link mount on...

 

[ktm racer 419]

Re: THe NAC Lots-O-Post Thread

just forward the deal to me and ill give you a high-5 and hot sauce

i mean you have 5 ton rockwells, you dont need a 60

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

The temptation to get this dana 60 even though it has balljoints and a short driver side tube is amazing... esp seeing as I can get it for 150 or so all told.

Also, I just realized I have bugged colin to ask him stupid axle questions on christmas eve twice in a row now (last time it was about a d30 with 4.10s and a detroit.) Hopefully I will either be asking him stupid questions about dana 120 axles next christmas or will have no stupid questions left to ask.

uh me travis and colin got short tube 60's i dont know why everyone has to be so XXXXing retarded about em, and FYI getting the 60 is the cheapest part when ya start dealin with knuckles shafts ect it gets spensive

 

[mini=man]

Re: THe NAC Lots-O-Post Thread

Wait, Ken,now you're going 60s? WTF?

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

just a brass punch and a hammer.

whats up with these fancy tools, i uded a socket ext. did just fine

 

[foxwar71]

Re: THe NAC Lots-O-Post Thread

"no law about carrying" is a bit of a stretch you still need a permit to carry concealed in Wyoming. Open carry there's no permit required, but iirc that's the same as NH, so who really gives a shit about Wyoming?

IIRC They dont have anything. Its Wyoming, you can do whatever you want pretty much.

This. And up untill a few years ago walmart in NH sold guns too. STFU

No FID, no nothing? All I had to do was show them my ID to show I was of age and they handed my guns.

The temptation to get this dana 60 even though it has balljoints and a short driver side tube is amazing... esp seeing as I can get it for 150 or so all told.

Say wha?!?! I'll take it then. Im serious.

why the eff do people even factor in ball joints vs kingpins on a $150 d60?

x2

uh me travis and colin got short tube 60's

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

you cut yours, so you got like a mid tube 60

 

[foxwar71]

Re: THe NAC Lots-O-Post Thread

you cut yours, so you got like a mid tube 60

To match my mid arms


Ive had debates about just getting another full width to run my wide rims on and be cool with you. Fawk it, next time around maybe, I'll make it work I guess.