THe NAC Lots-O-BFG KO2 Thread

[5spd_xj]

Re: THe NAC Lots-O-Post Thread

i didn't read any of the most recent posts longer than 1 sentence

glad to hear that you read all of my posts :laugh3:

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

so me thinkin about not running cv's on my driveshafts, i dont see why they would be needed on my rig, aint like it will see high speeds

 

[foxwar71]

Re: THe NAC Lots-O-Post Thread

Why would you weld ANY of that without mocking it under the XJ first? Seems like you are begging to redo somethings to me.

I know I know I know, I will agree I should have. I blame Mark for wanting his TIG back I am waiting for the axle to be under before I mess with the UCA location, but I know where my LCA's arms are gunna be and Im happy with the angles on the coil buckets/truss/caster.

 

[themangeraaad]

Re: THe NAC Lots-O-Post Thread

Finally shutting the laptop off. Done with work for the night. Now what should I do...

 

[RCman]

Re: THe NAC Lots-O-Post Thread

I know I know I know, I will agree I should have. I blame Mark for wanting his TIG back I am waiting for the axle to be under before I mess with the UCA location, but I know where my LCA's arms are gunna be and Im happy with the angles on the coil buckets/truss/caster.

You're just gonna end up cutting of the TIG welds. :roflmao:

How do you know the angle of the LCA? How do you know that you don't wan to stretch the coil buckets outward or backward (moving the axle forward)? I must have moved my buckets three times (only tacking them) before I was really happy with their placement.


Anyone care to find me a pancake muffler and cat converter? Single in and out, 2.5" diameter exhaust tubing. I need something thinner than 3". If it was 2.5" and super quiet that would be ideal. I've searched Summit Racing and Jegs, no luck.

 

[5spd_xj]

Re: THe NAC Lots-O-Post Thread

I must have moved my buckets three times (only tacking them) before I was really happy with their placement.

That's because you're you. :viking:

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

Bill you could try these
http://www.spintechmufflers.com/mufflers/street-mufflers/cruiser-mufflers-7000-series/cat_31.html

 

[5spd_xj]

Re: THe NAC Lots-O-Post Thread

I believe he was looking into those

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

Travis i do remember from the DWE Swanzy run the guy in the white cj wasnt runnin cv drivrshaft jist regulars corect?

 

[ROBZ95Xj]

Re: THe NAC Lots-O-Post Thread

i think bill should make his own chamberd muffler for 1/4" speel plate

 

[Hackmeister]

Re: THe NAC Lots-O-Post Thread

shred that gnar brah!

and for a sense of scale, my buddy at around the same spot:

 

[RCman]

Re: THe NAC Lots-O-Post Thread

Bill you could try these
http://www.spintechmufflers.com/mufflers/street-mufflers/cruiser-mufflers-7000-series/cat_31.html

I like those a lot, just not the price!

i think bill should make his own chamberd muffler for 1/4" speel plate

You laugh, I was debating making my own chamber and pack it, but it doesn't solve my cat converter problem.

 

[kastein]

Re: THe NAC Lots-O-Post Thread

Whelp, order placed for a bunch of relays and a car remote door lock/unlock alarm thing. Hopefully my "brilliant" plan works :roflmao: Now I just gotta find somewhere to pick up a flashing LED or 2 and a couple DPDT relays. I'm thinking radio shack will do well enough for me.

You probably can get away with an SPST and a DPDT, or two diodes, an SPST, and two SPDTs (much more common than DPDT automotive, nearly free at junkyards.)

 

[foxwar71]

Re: THe NAC Lots-O-Post Thread

You're just gonna end up cutting of the TIG welds. :roflmao:

How do you know the angle of the LCA? How do you know that you don't wan to stretch the coil buckets outward or backward (moving the axle forward)? I must have moved my buckets three times (only tacking them) before I was really happy with their placement.

I kicked the LCA mounts a little bit more then stock and angled them in a little bit more to shoot the to around jsut inside the framerails jsut in front of the crossmember area. I have the buckets straight up on the axle, Im planning on stretching the front out a few inches.

i think bill should make his own chamberd muffler for 1/4" speel plate

You laugh, I was debating making my own chamber and pack it, but it doesn't solve my cat converter problem.

:thumbup: i wanna try making a couple with different baffels and see what i can make for tones. Bill, the pepboys near me has magnaflow cats in 2.25 and 2.5" flavors, nice and compact too. Stainless steel, $85, MADE IN USA :rtm:

 

[Hackmeister]

Re: THe NAC Lots-O-Post Thread

there's too much tech in here right now i don't feel like reading any of it

 

[foxwar71]

Re: THe NAC Lots-O-Post Thread

[size=+2]FOR THE LOVE OF GOD PLEASE CLICK THE LINK AND MAKE SURE YOU SCROLL THRU PAGE 2!!![/size]






http://www.pirate4x4.com/forum/showthread.php?t=142814











you're welcome

 

[redneckboarder]

Re: THe NAC Lots-O-Post Thread

thats awesome

on a side note does anyone have a part number or know a good place to get d44 drum brake adjusters from?? im havin a hard time finding them

and no im not doing a disk swap at the moment

 

[foxwar71]

Re: THe NAC Lots-O-Post Thread

Call Jeff at Crown. He's got all those small parts and stuff. He also has 44 yokes and u-bolt yokes and pinion nuts and stuff for short money too

 

[kastein]

Re: THe NAC Lots-O-Post Thread

[SIZE=+2]FOR THE LOVE OF GOD PLEASE CLICK THE LINK AND MAKE SURE YOU SCROLL THRU PAGE 2!!![/SIZE]






http://www.pirate4x4.com/forum/showthread.php?t=142814











you're welcome

:twak:

I was signed into the work VPN dammit! Warn me first!

:eyes:

Colin/Travis/anyone else - what yard are you guys thinking of hitting Saturday? Hollands?

 

[MoparManiac]

Re: THe NAC Lots-O-Post Thread

Colin/Travis/anyone else - what yard are you guys thinking of hitting Saturday? Hollands?

Won't be going on Saturday.

If anything I MIGHT go Sunday, but probably not.