XBoBJ
NAXJA Forum User
- Location
- Spencer MASS
Re: THe NAC Lots-O-Post Thread
where you guys gonig....
where you guys gonig....
THe NAC Lots-O-BFG KO2 Thread
- Thread starter ROBZ95Xj
- Start date
billyjp2
NAXJA Forum User
- Location
- Indian Orchard MA
Re: THe NAC Lots-O-Post Thread
super secret UJ land
super secret UJ land
xjbump
NAXJA Forum User
- Location
- S.E. Mass, just above the Cape
Re: THe NAC Lots-O-Post Thread
Wow, I resemble that first remark and I thought compression fittings with a single flare is what you want?
Actually its illegal in MA to use them on brake lines and they also require a double or bubble flare but before I knew any better I used comp. unions with single flare especially to get off the trail or road.
Wow, I resemble that first remark and I thought compression fittings with a single flare is what you want?
Actually its illegal in MA to use them on brake lines and they also require a double or bubble flare but before I knew any better I used comp. unions with single flare especially to get off the trail or road.
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
I didn't know it was illegal :eyes: or...erm... well.. but either way: cop didn't see it, I didn't do it.
xjbump
NAXJA Forum User
- Location
- S.E. Mass, just above the Cape
Re: THe NAC Lots-O-Post Thread
It would only matter in the case of an accident.
At someone elses house. That only about 15 sticks Billy I'm sure your parents wouldn't notice.
I have one of those HF benders and it's still in the box from like 2 yrs ago. I thinking of using some left over cast iron pipe from when I worked on the furnace. haha.
I've heard if you use straight CO2 instead of argon you'll burn alittle hotter as far as mig.
It would only matter in the case of an accident.
At someone elses house. That only about 15 sticks Billy I'm sure your parents wouldn't notice.
I have one of those HF benders and it's still in the box from like 2 yrs ago. I thinking of using some left over cast iron pipe from when I worked on the furnace. haha.
I've heard if you use straight CO2 instead of argon you'll burn alittle hotter as far as mig.
Last edited:
Dundy
NAXJA Forum User
- Location
- Taunton, MA
Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
Re: THe NAC Lots-O-Post Thread
I just had a 2 hour interview with 4 people for a co-op job position, with them asking me all this really weird questions. It was fun.
I just had a 2 hour interview with 4 people for a co-op job position, with them asking me all this really weird questions. It was fun.
themangeraaad
NAXJA Forum User
- Location
- Halifax, MA
Re: THe NAC Lots-O-Post Thread
Yup. I was using CO2 when doing my floors since that's what came with the welder I bought. That is what I would use IF I decided to use my welder for a cage. I am very tempted to try building a bumper first and see how that goes.. I have some 3/16ths or 1/4" flat stock I may cut a couple pieces out of to see how deep the weld goes on that. If I can go slow and get good penetration I will consider using my mig for heavier stuff.
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
sweet steel rimz. aluminum is for imports.
sweet steel rimz. aluminum is for imports.
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
im gunna experiment with the TIG and try to fix and weld the old rim back to new status
im gunna experiment with the TIG and try to fix and weld the old rim back to new status
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
did you bust an aluminum rim, ross?
did you bust an aluminum rim, ross?
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
Ross. I'm positively FLATTERED by your new sig.
Ross. I'm positively FLATTERED by your new sig.
Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
Re: THe NAC Lots-O-Post Thread
What about the "Wheelers Who Want to Steal Mark's Jeep and Wheel it" foundation?
What about the "Wheelers Who Want to Steal Mark's Jeep and Wheel it" foundation?
xjbump
NAXJA Forum User
- Location
- S.E. Mass, just above the Cape
Re: THe NAC Lots-O-Post Thread
You can't steal what won't wheel.
You can't steal what won't wheel.
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
:roflmao:
Bump you're on a roll.
:roflmao:
Bump you're on a roll.
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
I might have an old spare in the pile 'o parts in the yard (cant remember if its a driver or passenger side) and I'm also not sure if it's a 260x or 297x (either way it'd probably need replacing) but if it's useable to you, it's free...
I might have an old spare in the pile 'o parts in the yard (cant remember if its a driver or passenger side) and I'm also not sure if it's a 260x or 297x (either way it'd probably need replacing) but if it's useable to you, it's free...
Re: THe NAC Lots-O-Post Thread
let me know, istill got the shaft that i had issues installing the ujoint in but i dont know if its tweked
let me know, istill got the shaft that i had issues installing the ujoint in but i dont know if its tweked
Similar threads
