Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
Re: THe NAC Lots-O-Post Thread
Colin...you suck!
Colin...you suck!
THe NAC Lots-O-BFG KO2 Thread
- Thread starter ROBZ95Xj
- Start date
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
i know what colin got today too
i know what colin got today too
Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
Re: THe NAC Lots-O-Post Thread
Ya but do you know why he is gay for it?
We were sweating it, we didn't think we were going to be able to get everything, sawz-all batteries don't last last... [size=-2](at least the first 2 didn't, the 3rd and final battery lasted longer than both of the first batteries combined)[/size]
i know what colin got today too
Ya but do you know why he is gay for it?
We were sweating it, we didn't think we were going to be able to get everything, sawz-all batteries don't last last... [size=-2](at least the first 2 didn't, the 3rd and final battery lasted longer than both of the first batteries combined)[/size]
Hackmeister
NAXJA Forum User
- Location
- Pittsburgh
Re: THe NAC Lots-O-Post Thread
so loading up the transmission with oil is a very messy job, BTW. I can't get it running yet though since I have to run out to sears and get a 30mm socket, annnnd I ripped my work pants down the crotch so I have to go find another cheapo pair of pants that won't mind a gear oil bath
so loading up the transmission with oil is a very messy job, BTW. I can't get it running yet though since I have to run out to sears and get a 30mm socket, annnnd I ripped my work pants down the crotch so I have to go find another cheapo pair of pants that won't mind a gear oil bath
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
kyle, use a siphon pump, it's not thaaaaat bad. does suck a little bit.
and for the 30mm socket... adjustable wrench is all i have to say. it's not like they get torqued to that much... and did you be sure to not use GL-5? supposedly it eats the synchros cuz it has too much sulfur content. GL-3 is what you're supposed to use but i've never heard concretely one way or the other. if you found GL-3, wher did you get it? i've been running 30wt motor oil in mine since december... :gee:
kyle, use a siphon pump, it's not thaaaaat bad. does suck a little bit.
and for the 30mm socket... adjustable wrench is all i have to say. it's not like they get torqued to that much... and did you be sure to not use GL-5? supposedly it eats the synchros cuz it has too much sulfur content. GL-3 is what you're supposed to use but i've never heard concretely one way or the other. if you found GL-3, wher did you get it? i've been running 30wt motor oil in mine since december... :gee:
foxwar71
NAXJA Forum User
- Location
- Foxboro, MA
Re: THe NAC Lots-O-Post Thread
WJ knuckles welded!!! they're currently sitting in a sand bath waitin til tomorrow to be removed. its so hard to try and focus on working on a D30 now that i have 1tons waitin.
WJ knuckles welded!!! they're currently sitting in a sand bath waitin til tomorrow to be removed. its so hard to try and focus on working on a D30 now that i have 1tons waitin.
Hackmeister
NAXJA Forum User
- Location
- Pittsburgh
Re: THe NAC Lots-O-Post Thread
oh i bought a siphon bump but its still a mess when the MT-90 bottles have a non-standard cap so the pump didn't seal well, and the hose also fell out of hte fill hole a few times too.
i tried an adjustable wrench but its too akward of an angle on the fill plug and it was starting to round it off. its tight because i used to have a 30mm socket (before all my tools were stolen). i'm using MT-90, i've done my homework!
oh i bought a siphon bump but its still a mess when the MT-90 bottles have a non-standard cap so the pump didn't seal well, and the hose also fell out of hte fill hole a few times too.
i tried an adjustable wrench but its too akward of an angle on the fill plug and it was starting to round it off. its tight because i used to have a 30mm socket (before all my tools were stolen). i'm using MT-90, i've done my homework!
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
what's mt-90?
what's mt-90?
asp
NAXJA Forum User
- Location
- Westport, MA
Hackmeister
NAXJA Forum User
- Location
- Pittsburgh
Re: THe NAC Lots-O-Post Thread
http://www.redlineoil.com/products_gearlubricants.asp?productID=46&subCategoryID=17&categoryID=7
http://www.redlineoil.com/products_gearlubricants.asp?productID=46&subCategoryID=17&categoryID=7
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
jesus that's expensive...
jesus that's expensive...
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
it's still gl-4... i've heard -3 was the way to do it but couldn't find any anywhere
it's still gl-4... i've heard -3 was the way to do it but couldn't find any anywhere
Hackmeister
NAXJA Forum User
- Location
- Pittsburgh
Re: THe NAC Lots-O-Post Thread
yeah but its apparently some of the best stuff you can get. i was running it in the old transmission for a year and a half or so and when i drained it, it was still as clean as it was brand new. besides for the metal shavings though
yeah but its apparently some of the best stuff you can get. i was running it in the old transmission for a year and a half or so and when i drained it, it was still as clean as it was brand new. besides for the metal shavings though
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
hmm good to know. i'll get some of that when i swap my tranny.
hmm good to know. i'll get some of that when i swap my tranny.
Hackmeister
NAXJA Forum User
- Location
- Pittsburgh
Re: THe NAC Lots-O-Post Thread
it was cheaper through summitracing, i think maybe $10 a quart instead of $12
it was cheaper through summitracing, i think maybe $10 a quart instead of $12
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
I just realized it's been 1 year and 2 days since I bought the Honcho. I was just looking at the pictures of it from the day I bought it and it was on May 14th 2008
Before:
After:
I just realized it's been 1 year and 2 days since I bought the Honcho. I was just looking at the pictures of it from the day I bought it and it was on May 14th 2008
Before:
After:
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
billy has run gl-5 before and not had a problem, i will say that
carmelo, sweet pics
nice, i'll remember that. thanks dude.
billy has run gl-5 before and not had a problem, i will say that
carmelo, sweet pics
redneckboarder
NAXJA Forum User
- Location
- cumberland RI
Re: THe NAC Lots-O-Post Thread
i witnessed a miracle today but ill let travis fill in the details
i witnessed a miracle today but ill let travis fill in the details
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
i think i might know about it too hehe
i think i might know about it too hehe
Similar threads
