altierior
NAXJA Forum User
- Location
- East Norriton, PA
Re: THe NAC Lots-O-Post Thread
Resident Evil 4 for Wii is sooo intense
Resident Evil 4 for Wii is sooo intense
THe NAC Lots-O-BFG KO2 Thread
- Thread starter ROBZ95Xj
- Start date
altierior
NAXJA Forum User
- Location
- East Norriton, PA
Re: THe NAC Lots-O-Post Thread
speaking of Wii, does anyone here play Mario Kart?
speaking of Wii, does anyone here play Mario Kart?
altierior
NAXJA Forum User
- Location
- East Norriton, PA
Re: THe NAC Lots-O-Post Thread
i think i'm wheeling the New Jersey Pine Barrens next Saturday. anyone interested in going?
i think i'm wheeling the New Jersey Pine Barrens next Saturday. anyone interested in going?
Re: THe NAC Lots-O-Post Thread
im almost done with my rear axle swap, its goin decent, started at 10 am this morning by installing the aussie, then went and got brake lins and wheel cylinders, stopped by deangelos on the way home for linch, did the brakes, then went to wally world to get gear oil and rtv, came home and pulled the rear end, all thats left id retightning the ubolts installing drive shaft and bleeding brakes
im almost done with my rear axle swap, its goin decent, started at 10 am this morning by installing the aussie, then went and got brake lins and wheel cylinders, stopped by deangelos on the way home for linch, did the brakes, then went to wally world to get gear oil and rtv, came home and pulled the rear end, all thats left id retightning the ubolts installing drive shaft and bleeding brakes
scully
NAXJA Forum User
- Location
- ma/nh border
Re: THe NAC Lots-O-Post Thread
i just used my snorkel...he he he.
and no doors=suck when water crossing.
i just used my snorkel...he he he.
and no doors=suck when water crossing.
Re: THe NAC Lots-O-Post Thread
just took the jeep for a test drive, locker works great, cant even tell its there unless your giving it a good amout of throttle around a corner, brakes are friggin awsome as there farley ner(thanks mark) now just need to do the frt brakes, there not to work but there a little old
just took the jeep for a test drive, locker works great, cant even tell its there unless your giving it a good amout of throttle around a corner, brakes are friggin awsome as there farley ner(thanks mark) now just need to do the frt brakes, there not to work but there a little old
xjbump
NAXJA Forum User
- Location
- S.E. Mass, just above the Cape
Re: THe NAC Lots-O-Post Thread
Well I got this XJ with a bad 2.5l in it. Colin and Cmelo were over the house, about a week or so, and we decided to start it up and see what was going on. It started with a jump but sounded like azz and really loud. So today I pulled the motor to see what was up. Can you see whats wrong?
Well I got this XJ with a bad 2.5l in it. Colin and Cmelo were over the house, about a week or so, and we decided to start it up and see what was going on. It started with a jump but sounded like azz and really loud. So today I pulled the motor to see what was up. Can you see whats wrong?
redneckboarder
NAXJA Forum User
- Location
- cumberland RI
Re: THe NAC Lots-O-Post Thread
there appears to be a lack of metal in the area to the rear of the motor mount
that may or may not be the issue
there appears to be a lack of metal in the area to the rear of the motor mount
that may or may not be the issue
Dundy
NAXJA Forum User
- Location
- Taunton, MA
Re: THe NAC Lots-O-Post Thread
that rod wanted to play peekaboo!
that rod wanted to play peekaboo!
Justpunchit
NAXJA Member #1291
- Location
- Jaffrey, NH
Re: THe NAC Lots-O-Post Thread
that engine is giving you it's O face
that engine is giving you it's O face
Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
Re: THe NAC Lots-O-Post Thread
Alright, so that sucked. We're done, thankfully, because that was a long day/night.
We found that the torque specs that we found were completely wrong for the ring gear bolts, as we snapped one inside the ring gear before we reached what we though was the specified torque. After screwing around with it forever, and having no luck of extracting it, Colin just said f*ck it since he didn't want to buy another set of gears, so we just threw it in minus one ring gear bolt.
Then we just couldn't get a good pattern no matter what we tried. And what was worse was we ended up running out of usable shims (they honestly don't supply you with enough in those damn install kits, and they supply you with too many of the large shims which don't help)
So, we ended up with this pattern. Its not ideal, but it is listed in the Yukon Gear's acceptable pattern page. We also figured that since it the axle has lockouts, its not a big deal, as the gears will only be run on the trail.
Alright, so that sucked. We're done, thankfully, because that was a long day/night.
We found that the torque specs that we found were completely wrong for the ring gear bolts, as we snapped one inside the ring gear before we reached what we though was the specified torque. After screwing around with it forever, and having no luck of extracting it, Colin just said f*ck it since he didn't want to buy another set of gears, so we just threw it in minus one ring gear bolt.
Then we just couldn't get a good pattern no matter what we tried. And what was worse was we ended up running out of usable shims (they honestly don't supply you with enough in those damn install kits, and they supply you with too many of the large shims which don't help)
So, we ended up with this pattern. Its not ideal, but it is listed in the Yukon Gear's acceptable pattern page. We also figured that since it the axle has lockouts, its not a big deal, as the gears will only be run on the trail.
cmelo
NAXJA Forum User
- Location
- Stoughton,MA
Re: THe NAC Lots-O-Post Thread
I'm definitely not claiming to know how to read gears more than you,ross or bill but isn't the pattern atleast supposed to be in the middle closer to the inside of the teeth? That looks like it's right dab smack in the upper corners.
I'm definitely not claiming to know how to read gears more than you,ross or bill but isn't the pattern atleast supposed to be in the middle closer to the inside of the teeth? That looks like it's right dab smack in the upper corners.
billyjp2
NAXJA Forum User
- Location
- Indian Orchard MA
Re: THe NAC Lots-O-Post Thread
im going wheelin
im going wheelin
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
I'm at work againnnnnnnn yayyyyyyyyyyy!! Have fun billy
I'm at work againnnnnnnn yayyyyyyyyyyy!! Have fun billy
Justpunchit
NAXJA Member #1291
- Location
- Jaffrey, NH
Re: THe NAC Lots-O-Post Thread
Working on the heep again.... :-\ I'm so sunburnt form yetsterday
Working on the heep again.... :-\ I'm so sunburnt form yetsterday
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
Wish I could say the same. haha
Wish I could say the same. haha
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
4 hours 40 minutes...
4 hours 40 minutes...
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
sucks about the ring gear bolt. gotta love the smell of gear lube on a nice hot day... i'm going to have to change my fluid before nacfest. yummy.
sucks about the ring gear bolt. gotta love the smell of gear lube on a nice hot day... i'm going to have to change my fluid before nacfest. yummy.
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
last night was a poop show around here.
last night was a poop show around here.
Similar threads
