THe NAC Lots-O-BFG KO2 Thread

Re: THe NAC Lots-O-Post Thread

i took it to the first shop in Marlborough today during lunch and the lifted up the tires and did it completely by the book. only the passenger ones are bad. and because ball joints are things that are easy to pretend don't work i made sure to have the guy show me. i'm going to just fix them on friday since it's supposed to be nice out both friday and saturday
 
Re: THe NAC Lots-O-Post Thread

put my street rims and tires back on. and swapped the bent tie rod out and realigned. the rod of the end that was bent is also a bit bent, but there was still a bunch of useable thread. so sue me, i put it back on. and without a cotter pin. :doh: i didn't have any and i destroyed the one that was in there getting it out.

still have a clunk upon turning, but it's the heim on the trac bar that i haven't installed the replacement for... oops again
 
Re: THe NAC Lots-O-Post Thread

so sue me, i put it back on. and without a cotter pin. :doh: i didn't have any and i destroyed the one that was in there getting it out.

paperclip :thumbup:
 
Re: THe NAC Lots-O-Post Thread

good idea.

green mountain gringo hot salsa ooooh so good.
 
Re: THe NAC Lots-O-Post Thread

time for bed. and another day of doing absolutely nothing at work tomorrow. fun fun fun! i'll certainly be here
 
Re: THe NAC Lots-O-Post Thread

Measuring tape :thumbup: hehe ;)
 
Re: THe NAC Lots-O-Post Thread

i ended up not having time. i haven't even started my HW that's due at 8 am yet. perhaps i'll be able to get the measuring done tomorrow between classes.
 
Re: THe NAC Lots-O-Post Thread

The hub helped my DW but it's still there. Definitely not as sensitive though. I'm gonna check the tightness of all my control arms, track bar, track bar bracket, and steering tomorrow to try to find something. I know the ball joints are good cuz i checked them a week ago when I had my front end checked. I'm guessing the TB bracket is a little loose or maybe I need UCA bushings (stock in the axle from 1988). I'll post up my findings.
 
Re: THe NAC Lots-O-Post Thread

you have the bypassed disco too? only good thing about it is the cast pass side uca mount..d
 
Re: THe NAC Lots-O-Post Thread

i doubt bushings could give you DW... unless they are really bad. i think it usually takes a hard joint to be loose
 
Re: THe NAC Lots-O-Post Thread

The hub helped my DW but it's still there. Definitely not as sensitive though. I'm gonna check the tightness of all my control arms, track bar, track bar bracket, and steering tomorrow to try to find something. I know the ball joints are good cuz i checked them a week ago when I had my front end checked. I'm guessing the TB bracket is a little loose or maybe I need UCA bushings (stock in the axle from 1988). I'll post up my findings.
there was a lot of play in those threads. i wonder if the threads on the TRE or in the tie rod ovalled out a bit from when it was loose...
 
Re: THe NAC Lots-O-Post Thread

Maybe...i'll check everything today.
 
Re: THe NAC Lots-O-Post Thread

Good luck sir :) Hope you can get it taken care of without much trouble
 
Re: THe NAC Lots-O-Post Thread

mooorning
 
Re: THe NAC Lots-O-Post Thread

harrow
 
Re: THe NAC Lots-O-Post Thread

junior writing is lame. i'd rather go do something useful.
 
Re: THe NAC Lots-O-Post Thread

students always complain about early classes. yet they're dumb. they think 8 am is early. the rest of the world has already been up for 2 hours by 8 am.
 
Re: THe NAC Lots-O-Post Thread

or 3 ;)
 
Re: THe NAC Lots-O-Post Thread

punk ass kids...
 
Back
Top