5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
^^that was POST number 6000, here's reply number 6000. ftw.
^^that was POST number 6000, here's reply number 6000. ftw.
THe NAC Lots-O-BFG KO2 Thread
- Thread starter ROBZ95Xj
- Start date
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
Good mooooorning.
Dentist appointment @ 7 a.m. FTL.
Good mooooorning.
Dentist appointment @ 7 a.m. FTL.
Dundy
NAXJA Forum User
- Location
- Taunton, MA
Re: THe NAC Lots-O-Post Thread
uuhhhhh Rob, There's an alignment chart somewhere on here that will put you in the ballpark with the lengths of the control arms.
uuhhhhh Rob, There's an alignment chart somewhere on here that will put you in the ballpark with the lengths of the control arms.
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
yeah. i think 5' 11" for the uppers would work well for ya. I read it before on some other forum, I'm pretty confident that it's accurate.
....There's my tech advice for the day, take it or leave it.
yeah. i think 5' 11" for the uppers would work well for ya. I read it before on some other forum, I'm pretty confident that it's accurate.
....There's my tech advice for the day, take it or leave it.
96TNXJ
NAXJA Forum User
- Location
- Kingsport TN
Re: THe NAC Lots-O-Post Thread
This is a list of the desired control arm lengths for the lift height you have.
Measurements are taken from hole to hole on the control arm. This is the same for both XJ and MJ over all years.
LCA = Lower Control Arm
UCA = Upper Control Arm
Stock
LCA - 15¾"
UCA - 15"
2"
LCA - 16"
UCA - 15"
3"
LCA - 16"
UCA - 15"
4"
LCA - 16 3/8"
UCA - 15"
5"
LCA - 16 5/8"
UCA - 15¼"
6"
LCA - 17"
UCA - 15½"
7"
LCA - 17 3/8"
UCA - 15¾"
8"
LCA - 17¾"
UCA - 16"
9"
LCA - 18¼"
UCA - 16¼"
10"
LCA - 18¾"
UCA - 17"
This is a list of the desired control arm lengths for the lift height you have.
Measurements are taken from hole to hole on the control arm. This is the same for both XJ and MJ over all years.
LCA = Lower Control Arm
UCA = Upper Control Arm
Stock
LCA - 15¾"
UCA - 15"
2"
LCA - 16"
UCA - 15"
3"
LCA - 16"
UCA - 15"
4"
LCA - 16 3/8"
UCA - 15"
5"
LCA - 16 5/8"
UCA - 15¼"
6"
LCA - 17"
UCA - 15½"
7"
LCA - 17 3/8"
UCA - 15¾"
8"
LCA - 17¾"
UCA - 16"
9"
LCA - 18¼"
UCA - 16¼"
10"
LCA - 18¾"
UCA - 17"
Justpunchit
NAXJA Member #1291
- Location
- Jaffrey, NH
Re: THe NAC Lots-O-Post Thread
^^^^^ I think that was the most useful post in this whole thread! lol
^^^^^ I think that was the most useful post in this whole thread! lol
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
probably because he's in tn
probably because he's in tn
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
arty: I got a FedEx tracking number in my email, I think Ballistic Fab finally decided I was worth 5 minutes of their time to box up/send out what was ready :laugh3:
arty: I got a FedEx tracking number in my email, I think Ballistic Fab finally decided I was worth 5 minutes of their time to box up/send out what was ready :laugh3:
Supermanxj
NAXJA Forum User
- Location
- Fairfield, PA/DEE-EFF-DUB
Re: THe NAC Lots-O-Post Thread
NAC ONLY MISTER!!!!!
Jk thanks for the tech... but totally wrong thread.... this is all BS. that was actually legitimate information. This cannot be tolerated. nominated!!
Josh
NAC ONLY MISTER!!!!!
Jk thanks for the tech... but totally wrong thread.... this is all BS. that was actually legitimate information. This cannot be tolerated. nominated!!
Josh
Supermanxj
NAXJA Forum User
- Location
- Fairfield, PA/DEE-EFF-DUB
Re: THe NAC Lots-O-Post Thread
Bitchin!! wadcha gettin???
Bitchin!! wadcha gettin???
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
he beat me to it. i referenced this one yesterday when i set mine. i haven't measured the caster, but it looks to be pretty damn good. i used the 4.5" lift settings... (15 + a little and 16.5 ish) very technical here...
http://www.ilovejeeps.com/forums/showthread.php?t=12524
he beat me to it. i referenced this one yesterday when i set mine. i haven't measured the caster, but it looks to be pretty damn good. i used the 4.5" lift settings... (15 + a little and 16.5 ish) very technical here...
http://www.ilovejeeps.com/forums/showthread.php?t=12524
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
oh yeah i forgot... (a little bit of a rant)
DICK'S SPORTING GOODS DIDN'T HAVE HOCKEY PUCKS WHEN I WENT THERE YESTERDAY. WHAT THE @#$^&***(&^@#$#*
oh yeah i forgot... (a little bit of a rant)
DICK'S SPORTING GOODS DIDN'T HAVE HOCKEY PUCKS WHEN I WENT THERE YESTERDAY. WHAT THE @#$^&***(&^@#$#*
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
Well, to avoid too much tech I *should* just direct you to my build page :rtm:... but whatever
DIY crossover steering kit with 1 ton TREs, coil/LCA/shock brackets, and an over the axle trackbar bracket. Couple shirts too. Only took em 3 weeks to send anything out. I think the tracking # I got is only for a portion of the order too, which is kind of lastara but oh well, at least it's something.
Well, to avoid too much tech I *should* just direct you to my build page :rtm:... but whatever
DIY crossover steering kit with 1 ton TREs, coil/LCA/shock brackets, and an over the axle trackbar bracket. Couple shirts too. Only took em 3 weeks to send anything out. I think the tracking # I got is only for a portion of the order too, which is kind of lastara but oh well, at least it's something.
MoparManiac
NAXJA Forum User
- Location
- Amherst, NH
Re: THe NAC Lots-O-Post Thread
I needed 12 hockey pucks :roflmao:
I have ~4" of uptravel up front. But the pucks don't really contact the upper bumpstop. I'm thinking about getting a longer insert up top to offset this.
I needed 12 hockey pucks :roflmao:
I have ~4" of uptravel up front. But the pucks don't really contact the upper bumpstop. I'm thinking about getting a longer insert up top to offset this.
Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
Re: THe NAC Lots-O-Post Thread
Umm, why does everyone jump on people if they post in here if they aren't in the NAC? Its not that big of a deal.
Umm, why does everyone jump on people if they post in here if they aren't in the NAC? Its not that big of a deal.
5spd_xj
<<the good ol days
- Location
- Dracut, MA
Re: THe NAC Lots-O-Post Thread
have you read the thread's title mark?
I agree, it isn't a big deal. I don't think anyone else is worried about it, we're just being smartasses
have you read the thread's title mark?
I agree, it isn't a big deal. I don't think anyone else is worried about it, we're just being smartasses
Re: THe NAC Lots-O-Post Thread
ive been looking at that chart but my issue is the shortest my uppers will go is 15.25 so well have to see how she handles
ive been looking at that chart but my issue is the shortest my uppers will go is 15.25 so well have to see how she handles
Re: THe NAC Lots-O-Post Thread
i got 2" of up travel in the frt, wich has alot to do with the hover convertion
i got 2" of up travel in the frt, wich has alot to do with the hover convertion
Supermanxj
NAXJA Forum User
- Location
- Fairfield, PA/DEE-EFF-DUB
Re: THe NAC Lots-O-Post Thread
x2 I REALLY DONT CARE that he is not in NAC... just bustin chops.
carry on!
have you read the thread's title mark?
I agree, it isn't a big deal. I don't think anyone else is worried about it, we're just being smartasses
x2 I REALLY DONT CARE that he is not in NAC... just bustin chops.
carry on!
asp
NAXJA Forum User
- Location
- Westport, MA
Re: THe NAC Lots-O-Post Thread
i've got 3.75" or so (after i add the hockey pucks which i have yet to get)
yesterday i made a boo boo and made both my uppers and lowers a bit short. the uppers were at no more than 15" and now they're at 15 1/8". the lowers were only at 16" and now they're at 16 5/8". suspension is done, jam nuts are tight. good to go (other than greasing the ball joints but i need to get 3 more zerk fittings first. rock krawler arms seem to have freaking tiny ones. it's not cool. hopefully napa has them. hypothetical bumpstop to full droop, i have 10 1/8" of travel. not bad for short arm.
just took the 30 apart and popped out the axle seals. going to go to napa now and press in a new driver side seal and hopefully they'll have one that i can press into the tube right next to the carrier. stupid disconnect axle.
i've got 3.75" or so (after i add the hockey pucks which i have yet to get)
yesterday i made a boo boo and made both my uppers and lowers a bit short. the uppers were at no more than 15" and now they're at 15 1/8". the lowers were only at 16" and now they're at 16 5/8". suspension is done, jam nuts are tight. good to go (other than greasing the ball joints but i need to get 3 more zerk fittings first. rock krawler arms seem to have freaking tiny ones. it's not cool. hopefully napa has them. hypothetical bumpstop to full droop, i have 10 1/8" of travel. not bad for short arm.
just took the 30 apart and popped out the axle seals. going to go to napa now and press in a new driver side seal and hopefully they'll have one that i can press into the tube right next to the carrier. stupid disconnect axle.
Similar threads
