Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
Re: THe NAC Lots-O-Post Thread
When testing the terminals on the CPS with an ohm meter, which terminals should I be touching, and what should they be reading?
I took two measurement, my 4 door and 2
With the multimeter set to ohms, and touching the same terminals, I got around 640ish on the 4 door, and 220 on the 2 door.
Should I replace? Possibly shorted out since there is little resistance?
When testing the terminals on the CPS with an ohm meter, which terminals should I be touching, and what should they be reading?
I took two measurement, my 4 door and 2
With the multimeter set to ohms, and touching the same terminals, I got around 640ish on the 4 door, and 220 on the 2 door.
Should I replace? Possibly shorted out since there is little resistance?
Last edited: