T-case/tranny compatibility

[awr94903]

Will an np231 from a 23 spline aw4 work with an ax-15 from a '95 xj?

 

[XJJPR]

Not without changing the input in the tcase from a long 23 to a short 23 spline

mark
orgs mfg

 

[Beezil]

there goes the t-case slut again.......

 

[awr94903]

thanks mark, i found a np231 with 4:1 on PBB, but i guess I'll have to pass.

 

[sarvermr]

its easy to swap over the input shaft or just have the long shaft cut down (that way you only have to take apart one case). i certainly wouldn't let that stop you from changing to a 4:1 case. i have a tj 231 from an ax15 behind my aw4 right now. i just took it apart and had a machine shop cut 3/4" off the input shaft. cost: $30.
matthew