- Location
- Columbus, In
Anyone have a passenger side front window for a 97+? My buddy needs one for his. I can trade a sixer of something for it.
Swap Meet
- Thread starter IllianaXJ
- Start date
POLAR_JEEP_04
NAXJA Forum User
- Location
- Ohio
I'm looking for a junk or trashed 23 spline NP231J that I can use for my 231/300 doubler.
XJ-ARNIE
NAXJA Forum User
- Location
- Cary, Illinois
I got 50 into it, Ill let her gor for 40.
- Location
- Columbus, In
Got time to pull it? I can pay you whatever it cost plus a sixer of something! I'm getting it for him as a wedding gift! :roflmao:
85xjwoody
NAXJA Forum User
- Location
- Little Suamico Wi.
Works for me. Hitch is sold. Thanks Tyler.
terrehautian
NAXJA Forum User
- Location
- Terre Haute
I have a few things to get rid of. I don't have pics as of now but if needed I will get some.
Class III hitch in good shape. $30.00
One set of factory front tow hooks and brackets. Brackets are bent from taking a few tugs but still work fine and install without a problem. No hardware with these though. $15.00
One set of aftermarket tow hooks and brackets. I don't know the manufacture of these but they are in good shape with a minor bend in one. $25.00
Both front and right passenger doors off of a 97 xj, color black with some dirt.$25.00 each.
I have more to list and will add them when i get off of work.
What would I need for the aftermarket tow hooks? Bolts? Also, will you ship them?
XJosh95
NAXJA Forum User
- Location
- Green Bay, WI
Well, I'm pretty well set. I've spent so much money in the last 6 weeks on Jeep stuff, I'm not gonna need much for a while.
PM me an offer. The worst I can say is no.
Also should have a Rusty's Adj track bar that needs a new TRE. (Not heavy duty) Honestly...Almost any offer will be accepted.
I'll be starting the build up soon, I'll update if anything else comes off and won't go back on.
XJ-ARNIE
NAXJA Forum User
- Location
- Cary, Illinois
how-a-bout a sixer?
comancheon33
NAXJA Forum User
- Location
- Casey,Ia
I got some factory black MJ interior parts. Mostly the trim that goes around the headliner. The A and B pillar trim and around the door openings. Not resto quality has had holes drilled in the b pillars for something. Small but there, and all needs cleaned up badly has duct tape glue on it. $75 for all.
XJ 44 housing, axles, factory limited slip, and rubicon thick 4.10 gears. It all needs assembled. I have the 8.8 disc brake brackets and calipers to convert to disc brakes. $250 cash only
Banks Six shooter for an 06 Cummins, used ready to go. $250
8.25 3.55 27 spline complete drum to drum $50
Shortbed Comanche rolbar. Factory without the tie ins. In great shape could use a coat of paint. $100
Comanche tailgate of an 86 with chrome handle. Good shape $40
JKS Drag link for WJ swap with tie rods. Just dirty I recently built my own with one ton tie rods. $30
ZJ V8 coils good shape $30
MJ Dana 35 3.07 $25
I know I have more just need to go look around the shop and shed.
XJ 44 housing, axles, factory limited slip, and rubicon thick 4.10 gears. It all needs assembled. I have the 8.8 disc brake brackets and calipers to convert to disc brakes. $250 cash only
Banks Six shooter for an 06 Cummins, used ready to go. $250
8.25 3.55 27 spline complete drum to drum $50
Shortbed Comanche rolbar. Factory without the tie ins. In great shape could use a coat of paint. $100
Comanche tailgate of an 86 with chrome handle. Good shape $40
JKS Drag link for WJ swap with tie rods. Just dirty I recently built my own with one ton tie rods. $30
ZJ V8 coils good shape $30
MJ Dana 35 3.07 $25
I know I have more just need to go look around the shop and shed.
Last edited:
cardboard
NAXJA Forum User
- Location
- So. Central Indiana
Cheese is this still available? My brother in law has been searching for a good beginner welder to learn on and this may fit the bill.
cardboard
RedHeep
NAXJA #1499
- Location
- Landenberg, PA
Pulling the old set of JCR stage 2 sliders off the '91 this weekend. These have been to tellico, flat nasty, moab, uwharrie. The left one has an awesome dent in the round tube from exploding my transfer case in 2007. These are early JCR production from 2006. Could use a coat of paint.
100 bucks off the new price: $145
100 bucks off the new price: $145
- Location
- Columbus, In
That's a steal! Anyone thinking about rails should scoop these up. Mine have bounced off a few rocks and a Mercedes and are still in great shape.
- Location
- bourbonnais IL
i will deffently have to think these over, im sure ther not too much diffrent but what makes them diffrent from the new style? any pics
now i gotta try and sell the 30" MT/s
deffent maybe
-Rew
- Location
- bourbonnais IL
now for sale
set of 4 hankook dynopro MT's and 1 G/y wrangler 235/75/15 for a spare
they have a little wear on the outside(white letter side) of them but they would be good for a stocker with a trim or a 2"lifted rig with no trim
they got life left in them, here's some pic's
located in hammond IN or possable delivery to WF
300OBO
RedHeep
NAXJA #1499
- Location
- Landenberg, PA
They're still the same design. Just wanted to point out that they are almost 5 years old.
I'll take a couple pictures today. I beat on them, but other than the dent, they'll look brand new with some paint.
And unlike the manufacturer, I'll deliver to WF.
XJ-ARNIE
NAXJA Forum User
- Location
- Cary, Illinois
XJosh95
NAXJA Forum User
- Location
- Green Bay, WI
Sold! I'm not too picky...if you think it's worth a micro-brew, I'd try anything.
XJ&CHZ4ME
NAXJA Forum User
- Location
- Unionville, MO
yup, still have it. I think I may have an extra roll of flux core wire to go with it as well. The cart in the pic is not included (it is a home made job and sucks anyhow). let me know if you need anymore info and I will see what I have as far as extra tips, cones and wire for it. There is absolutley nothing wrong with it, I just bought a new 220 unit.
