Stroker 4.0

[wf_s10]

Has any body used stock 4.0 pistons and rods with 258 crank and if so what happend. If it worked and what it took to make it work thanks

 

[cruiser54]

Doesn't work. Need custom pistons to use 4.0 rods with 258 crank.

 

[wf_s10]

Ok thanks if i was to get pistons would that be all i would need and would that still run on 87 oct

 

[GrimmJeeper]

www.jeepstrokers.com everything you need is there, or by searching here. it's been covered many times.

 

[wf_s10]

Thanks

 

[wf_s10]

Will 258 cam work in 89 4.0 if it will work how will it affect power

 

[gradon]

Why don't you take a drive up to Birmingham and talk to the folks at Hesco about what you want done to your jeep?

 

[GrimmJeeper]

face time with hesco > interweb guesswork

 

[wf_s10]

Does anyone know the exact address

 

[wf_s10]

I thank I'm going to rebuild the 4.0 for now does anyone have a cam and lifter set they don't need cheap

 

[gradon]

http://www.hesco.us
HESCO Inc.
1200 2nd Avenue South
Birmingham, AL 35233 US
Phone: (205) 251-1472
Fax: (205) 251-8358
email: [email protected]

They sell cams

 

[wf_s10]

Thanks I think I no about where that is

 

[kf_chris]

You need to go to Jeepstrokers.com
Seriously. All your questions can get answered easily

 

[Dr. Dyno]

Seriously. All your questions can get answered easily

Especially by a certain gentleman who owns these sites:

http://www.jeep4.0performance.4mg.com/stroker.html
http://www.angelfire.com/my/fan/stroker.html

_________________________________
1992 XJ Laredo - Manual - 4.6 Stroker
[email protected] - 201.7rwhp/258.2rwtq - 3450lb no driver

1995 Mustang GT - Automatic - 5.0 V8
[email protected] - 243.5rwhp/284.2rwtq - 3260lb no driver