Ba-Riedo
has frame envy
- Location
- redmond/bellingham, wa
ive searched around a bit and i cant find a way to get the factory skid i picked up onto my jeep
anyone got pictures of it
thanks
alex
anyone got pictures of it
thanks
alex
stock front skid
- Thread starter Ba-Riedo
- Start date
- Location
- Newark, CA
There's four M8 bolts that go into the frame and you can use three M10 and nuts on the front underside of the grill.
Mine's waiting to go on this weekend. I'll take some pics of it in the morning.
Mine's waiting to go on this weekend. I'll take some pics of it in the morning.
Bolts go into the frame rails just behind where the sway bar is mounted.
Factory mount used threaded studs in the cross member and nuts to hold up the front of the skid. My XJ did not have the studs, but had the holes that lined up. I reamed the holes and used (3) nuts/bolts.
Pretty dang solid for a factory skid!
Factory mount used threaded studs in the cross member and nuts to hold up the front of the skid. My XJ did not have the studs, but had the holes that lined up. I reamed the holes and used (3) nuts/bolts.
Pretty dang solid for a factory skid!
- Location
- Roanoke VA
Not the best pic, but here it is. It works real good for anything under 4" of lift.
- Location
- Minneapolis, MN
- Location
- Newark, CA
I was underneath my heap so I took some pictures of the front skid as I was putting it on.
Passenger Side:
Driver Side:
Front below bumper:
Passenger Side:
Driver Side:
Front below bumper:
