Steel braided brake hose fitment

[REDXJ4FUN]

Has anyone cross referenced or brake hoses against other makes and models to see what other brake hoses would work? I want braided lines but most kits for or jeeps are for 4 to 6 " of lift and I'm going the other way... mustang stuff looks similar but not sure

xoom xoom xoom

 

[John(XJ)Jeep]

Me too. Gave up this search a while ago for that very reason. Would also like to know.

 

[souske]

Hit up crown, they can make whatever you want

 

[REDXJ4FUN]

http://www.autoanything.com/brakes/61A6145A0A0A3396971.aspx

Found some for stock height but but still like to see what else will fit
xoom xoom xoom

 

[REDXJ4FUN]

Finally got around to installing and bleeding them.. much firmer pedal so very much worth it but I know they can be found for cheaper

xoom xoom xoom

 

[MaxxXJ]

I bought crown brake lines, you can get them in whatever size you need for like $100

 

[REDXJ4FUN]

It was only 80 shipped for front and rear but I still want to find a cheaper way

xoom xoom xoom

 

[NorCalChris]

Some Chevy truck brake lines fit, plus are good for a lifted xj. Not sure on what model truck though

 

[REDXJ4FUN]

There's plenty of options for lifted jeeps just not many for stock or lowered jeeps. Unless you want to be using zip ties to keep them out of the way.

xoom xoom xoom

 

[GrimmJeeper]

Some Chevy truck brake lines fit, plus are good for a lifted xj. Not sure on what model truck though

98 chevy 1500 2wd front lines are long enough for the front of an XJ lifted 4-5". too long for what he needs.


these guys will make whatever you want, and the price is pretty good too.

http://www.techna-fit.com/catalogs.html

they're local to me, he made the 29" hoses for the front of my prerunner for less than 20$ each.

 

[souske]

There's plenty of options for lifted jeeps just not many for stock or lowered jeeps. Unless you want to be using zip ties to keep them out of the way.

xoom xoom xoom

I used a rubber coated holddown, with a small bungee to the UCA, stays out of the waY until I need it, then it flexes right down.

 

[GrimmJeeper]

I used a rubber coated holddown, with a small bungee to the UCA, stays out of the waY until I need it, then it flexes right down.

carburetor return springs work well also

 

[grainofsalt]

I bought some goodridge braided lines fo a YJ, I don't have them installed yet but you may want to give them a look, Just my .02.