Spring Wrenchfest

[PacificEd]

Anyone interested in getting together at the shop to do some pre-Crawl wrenching and vehicle maintenance?

I'm going to talk with Mark and see when might be a good time to get together.

I need to rebuild some driveshafts and get an exhaust ready to install, grease all zerks and change oil for sure.

 

[Cottontail]

I'd be up for it. At the minimum we could toss my Jeep on the lift and weld the exhaust hanger back on.

 

[shortxjdoug]

my sister lives in murfreesboro...do you guys think you could install a radiator in her xj if i send her with some edible goodies and parts? im so booked up im not sure ill be able to make te trip but it would be a huge help

i did the 0630 swap and headgasket on it but the drive back to the boro revealed a pinhole leak, if i wuld have known i would have done it while it was here

 

[PacificEd]

Depending upon when we get it set up, I don't think it would be a problem to help her out.

 

[thechief86]

If it's on a Saturday, I'll come! I have lots of work to do to mine, but I'd probably just help you guys.... I need to swap in a front axle and patch my floors before I start any of the big projects....

 

[High2by]

I'd be up for this too, I just got to get my Jeep back.

 

[dave92cherokee]

http://www.tnjeeps.com/topic/3383-j...nd-wrenches-iv-sheduled-for-june-8th-and-9th/

Not sure if people in the mid tn area are interested in meeting some new jeep people but there's a get together next month that's looking like it's going to have a sizable turnout. Hoping to have the cheromanche drivable by then to get up there and get the box tube rockers welded up.

 

[shortxjdoug]

Depending upon when we get it set up, I don't think it would be a problem to help her out.

thanks....it would mean a lot to me

 

[PacificEd]

Right now it will be sometime in June.

 

[Cottontail]

Just don't pick June 8. I'll not be available for that.

 

[PacificEd]

Right now June 1st and 15th are on the table. I've got to check with the wife to see if anything is planned on those dates.

 

[thechief86]

I vote June 5! My father in law and my granddad's birthdays are both on the 1st

 

[shortxjdoug]

2nd weekend in June and I might be able to come

 

[MELKORsXJ]

I'm on call the weekend of the 1st so that's out for me. I don't plan to bring anything to work on, but will lend a hand if I can make it.
I will also head up the radiator swap if all the details work out... I've swapped mine 2-3 times lol

 

[dave92cherokee]

Where in the boro is this going to be at? Was planning in trying to bring the cheromanche to the tnjeeps get together to get the box tube rockers welded on but would rather go to the boro as it's a lot closer.

 

[Cottontail]

Ed isn't in Murfreesboro. He's in Woodbury.

 

[thechief86]

I thought that was technically either readyville or bradyville? Either way, it's another 30-45
Minutes from the boro...

 

[Cottontail]

Yeah, I think you are right Eric. I just know that I usually stop at the McDonalds in Woodbury and tank up at the gas station there in town when I got down!

 

[Cottontail]

Ed, you got a date firmed up yet? I got LeBaron vents on the way. I'm going to cut 2 big holes in a perfectly good hood!

 

[PacificEd]

Right now June 15th is the date we are going with.

Please post up what projects everyone wants to work on so we can plan the day.