Sierra "Karma" thread

[knucklehead 61]

I need to get this stuff out of my garage.

Stock front driveshaft from a 95 auto.

Dana 30 brake calipers.

Stock steering box.

I am in dublin.

i could use a good spare driveshaft.
are you going to sharkmarks build party fri or sat in san jose?

 

[jeepme]

I was at the rubicon work weekend all weekend.

 

[Starboard M]

Still here:
Hella 500 covers
Calipers off of a '89 D30
Coolant bottle off of Renix engine, "holds pressure" at least for a bit
Stock HP30 diff cover
Random white shocks, Ill measure them when I find the rest of them

Located in the East Bay

 

[blondejoncherokee]

i have 2 hoods
set of fenders
dash and some interior stuff
other engine parts
some overflow bottles
upper and lower radiator hoses

 

[smallshafts]

i will take those fenders if you still have them

 

[blondejoncherokee]

come grab em
for any one on here that wants my parts please pm me! i dont check this thread enough!

i have lots of parts lying around!
i have CAD axle outer shaft (pass side outer outer) with unit bearing.

looking for dana 44 rusffstuff cover
axle truss front and rear
limiting straps
dodge van main leafs

i will happily trade other parts/cash for those things!

 

[SharkXJ]

FREE to a good home. All off of a 2001 with 95k.

Stock Suspension:
Control Arms (Upper and Lower),
Shocks
Coils
Leafs

Track Bar

Tie Rod & Drag Link

Up Country Gas Tank Skid

LP D30 Housing plus gears - Keeping the knuckles & brakes

Dana 35

White Front and Rear Bumpers with Caps

White Fender Flares

 

[SeansXJ]

almost new renix rad... got it on a trade with a bunch of parts and don't need it. the previous owner cut the tranny cooler line on the drivers side a little short.

Sacramento

 

[blondejoncherokee]

first come first serve

i got some dana 35 shafts(semi floating shafts)

a starter off a 91

some radiator hoses in good shape

hood

fenders

HO overflow bottles

cracked renix exhaust manifold

torque converter

head lights

front grill with the whole front clip too


cooling fan

tail lights (one is cracked )


drag link and bent tie rod
(must take both)

steering linkage(from the box to the column)
with good u joints

 

[REVROK]

FREE to a good home. All off of a 2001 with 95k.

Stock Suspension:
Control Arms (Upper and Lower),
Shocks
Coils
Leafs

Track Bar

Tie Rod & Drag Link

Up Country Gas Tank Skid

LP D30 Housing plus gears - Keeping the knuckles & brakes

Dana 35

White Front and Rear Bumpers with Caps

White Fender Flares

Mark- Thanks!

 

[Johnnie Walker]

I have a pair of Renix rotors, measure approx 7/8" across. Not sure what min width after turning is.

I also have used, but good condition caliper "bolts" they are the ones that have a 7mm hex head. And 3 of the 4 total pad "clips"

I also have a set of fenders (96-) with inner fender and flares still attached. Gold-ish in color. couple dents and some scratches but overall decent shape.
I live near Pismo Beach (About 2.5-3 hours south of San Jose).

 

[kybray44]

first come first serve



front grill with the whole front clip too

What year is the clip from? My front grill surround is cracked and needs replacing.

 

[REVROK]

What year is the clip from? My front grill surround is cracked and needs replacing.

I was just at Jon's house... Pre 96

 

[87Deathwagon]

Anyone got an alternator lying around? :dunno:

 

[poomero]

does anyone have a dana 30 for the front of an xj with out the vacuum disconnect that they are not using or the axle conversion to eliminate the vacuum disconnect??? I hate the vacuum disconnect and i want to swap.

I have a 90 with a 4.0 i dont know if this matters.

 

[Letterman]

does anyone have a dana 30 for the front of an xj with out the vacuum disconnect that they are not using??? I hate the vacuum disconnect and i want to swap.

I have a 90 with a 4.0 i dont know if this matters.

For about $25 you can get a seal kit and swap out the 2 pice axle for a solid one.

 

[SeansXJ]

For about $25 you can get a seal kit and swap out the 2 pice axle for a solid one.

yeah that link on your thread explains it Poomero

 

[sik4wheeler]

Anyone have a 91+ AW4?

 

[rocknxj]

Anybody want a cracked exhaust manifold from a '99?

 

[knucklehead 61]

i could use a flat style cat converter to replace the round (& newly bashed in) one in my 2000 xj