Looking for some good ideas on roll cage desing. Hopefully some pics. also. I have done cages in drag cars before, so some of my ideas are coming from there but I need something that is a little more user friendly. If/when it rolls it will probably only be a lite roll on the side, no rocks in my area of PA. Any advice is appreciated. Thanks Jason
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Rollcage design
- Thread starter XJHOX
- Start date
- Location
- Indiana-Missouri
Sponge Bob
Attitude Racing
- Location
- Mokena,ILL
Beezil you should ad these pictures to the tech articles.
FarmerMatt
NAXJA Forum User
- Location
- Down on the Farm
Matt
NAXJA Forum User
- Location
- Hobart, WA
There are pics of my cage at this address...
Exo w/ internal cage
and I know it works
If you look at my other post today - had the jeep on its lid last night - nearly a foward endo (turned in the air and fell to the driver side and then onto the roof...
Matt
Exo w/ internal cage
and I know it works
If you look at my other post today - had the jeep on its lid last night - nearly a foward endo (turned in the air and fell to the driver side and then onto the roof...Matt
SyCo
NAXJA Forum User
- Location
- Spokane, WA
Matt, what kind of tuffy storage box is that?
FarmerMatt
NAXJA Forum User
- Location
- Down on the Farm
The box is the big one made for YJ's. It's supposed to fit in the tub of a YJ between the rear wheel wells & from the fronts seats to the tail gate. It fits the XJ pretty good except you need to space it up off the floor about 1.5" for it to clear the hatch mount.
I don't know which Matt your asking, but my seat belts use the factory mounts.
Matt
I don't know which Matt your asking, but my seat belts use the factory mounts.
Matt
I had a cage built for mine recently by All4Performance and I really like how it turned out. We're still debating on the addition of a dash bar and the shop guys are gonna add more gussets. The difference in height of the front and rear stringers is my fault - I'll learn to let the shop guys do their job some day.
- Location
- Indiana-Missouri
no sir....
using aftermarket four-point harness.
SB, I think you'll particularly like this reinforcement add-on device that was envisioned by dan a couple weeks ago, that is meant to go on a recent aftermarket rollcage design....
doncha just love it?
using aftermarket four-point harness.
SB, I think you'll particularly like this reinforcement add-on device that was envisioned by dan a couple weeks ago, that is meant to go on a recent aftermarket rollcage design....
doncha just love it?
Sponge Bob
Attitude Racing
- Location
- Mokena,ILL
I need room in my Pineapple under the sea for my square pants.arty: Sponge Bob
