hiimmred
NAXJA Forum User
- Location
- San Bruno, California
That's alright I'll throw on my eye patch and bring my sword and some Rum and afterwards we can play pirate! Arrrrrrrrrrrrgh!
irate1:
irate1:
Reversing Anti-Lambo Doors
- Thread starter Letterman
- Start date
- Status
- Location
- San Bruno, CA.
Why did her dog almost kill her?
More Kegstandguy.
More Kegstandguy.
Coastie
NAXJA Forum User
- Location
- Upper Peninsula, Michigan
Boostwerks.com
NAXJA Forum User
- Location
- Colorado
am I the only one that is currently asking self ---> WTF?
- Location
- West Sacramento, CA
You're not so hot on the reading comprehension, huh?
buzzbombxj
NAXJA Forum User
- Location
- lake chabot
- Location
- Seattle, WA
"Re-think"??? Doesn't that imply that there was thought involved in the first place.
I will say this - Letterman is the only person named Dave with semi-decent welding skills, located close enough to my house, that I will let weld my stuff in exchange for an 18-pack of beer that he lets me help drink. I can say without reservation that I somewhat recommend his welding ability for a near-free price.
:cheers:
anthrax323
NAXJA Forum User
- Location
- San Antonio, TX
Now THAT is a testimonial right there, folks.
"I don't know, but my gut screams maybe."
Hammered
NAXJA Forum User
- Location
- Jeep Fiend Club
can you turn the heat up a lil on that welder?
Hammered
NAXJA Forum User
- Location
- Jeep Fiend Club
or turn the wire speed down a smidge
Hammered
NAXJA Forum User
- Location
- Jeep Fiend Club
lastly... you may wanna clean some more of the paint away before you go back at it 
Mad Respect Yo!
Well after the door falling off it was time for some reinforcement, I took some 1.75 DOM 2.50 wall and started to make some doorframes for extra support. After a few hours of yelling at each other on how it should be done, I did it my way anyway.
Bending up the 1.75 DOM:
I think my scale may have been a little off, is the " symbol inches or feet?
I thought ahead and made two of them so I would save time for the passenger side too:
Bending up the 1.75 DOM:
I think my scale may have been a little off, is the " symbol inches or feet?
I thought ahead and made two of them so I would save time for the passenger side too:
Once I had them both bent up, I thought it might be a good idea for a test fit:
For over 6 hours we pushed and tried to force it to fit:
Dose anyone know a good way to un-bend 1.75 DOM 2.50 wall tube?
Maybe I just need to make the doors bigger? :idea:
For over 6 hours we pushed and tried to force it to fit:
Dose anyone know a good way to un-bend 1.75 DOM 2.50 wall tube?
Maybe I just need to make the doors bigger? :idea:
So after all the wasted hours we spent working on the doors, we ended up doing what I think most anyone on 
would do at this point. I welded up the doors and we put a big 01 on the side of the rig. I think we all know how hot the girls get for any car with a big 01 on the side, and what a thrill they get from going in through the windows:
would do at this point. I welded up the doors and we put a big 01 on the side of the rig. I think we all know how hot the girls get for any car with a big 01 on the side, and what a thrill they get from going in through the windows:
- Location
- East of Cincinnati
I want a writeup on how to get my hood to open all the way like that...
Way cool...
Roebrt
Thanks that is a "Letterman Original Signature Modification Mod", I might do a 6 or 9 page write up on that soon! Keep your eyes open for more of my sweet tech and prototype mods!
Blaine B.
NAXJA Forum User
- Location
- Northwest Indiana
Looks like a good hinge fit. The upper driver's side hinge on my 95 was welded. Let me say I just started welding, never took a class, and I can lay a nicer bead using Harbor Freight wire on a 110v Craftsman flux core welder than what the previous owner layed out to fix that hinge.
Is there something that I can help you understand better?
Look this is good:
But this is better:
All it takes is this:
Any Questions?
- Status
