Dan2000XJ
NAXJA Forum User
- Location
- Carpentersville IL.
Ok so i put on my full traction long arm kit a week or two ago and i made a small mistake put on one of the lower controle arm brackets an 1/8 of an inch more forward than the other and i got it all adjusted and everything and it rides good and straight but it really bothers me knowing that it is not right so i want to fix it. But i cant just take it off and move it back because it is held on with self tapping bolts. So if i move it half of the old hole will be where the new hole needs to be and the bolt wont be as strong. So what i am getting at is should i take the bracket off and weld up all of the old holes then restart or should i weld on a new piece of metal over the framerail to reinforce and double the thickness of the framerail metal so the self tapping bolts have more to bite into or should i take it to a shop and have the brackets professionaly welded on to the jeep and have no bolts to worry about. Any thoughts or comments greatly apreciated.
Thanks, Dan
Thanks, Dan