Recognize this joint? Help! Pics...

[andrew2516]

I'm having some death wobble issues with the jeep. I just replaced ball joints and checked the tie rods. I noticed a little play in the track bar joints.

So I tore it all apart, and I cannot find the joints at all...

They look similar to a teraflex track bar joint I seen but the joints I found do not have a 2" shoulder

They are 7/8" shank 18tpi and the bore is about 1/2"

I have two of these both RH and LH thread

I would just replace them with heims but I cannot find heims in 7/8" 18tpi

If I know what kind of joints they are...maybe I can find parts to rebuild them.

Any input appreciated!





Not that it matters but here is the basic setup...Inverted T steering OTK, OTK Track Bar, these joints on both ends...

 

[blondejoncherokee]

Are these on a trackbar or control arms ?

 

[blondejoncherokee]

Currie maybe or ballistic ?

 

[Jbh97009]

I'm pretty certain those are old school currie joints

 

[1990JEEPXJ]

looks teraflex to me

 

[cal]

Yup. That is a Teraflex Monster Joint.

 

[andrew2516]

Thanks guys...it's a teraflex medium monster joint for sure. I found it after searching for a while. It's usually used on control arms/ long arms. I was going to get the rebuild kit but my joint looks like an older version so I just ordered new joints.