Rear hatch rattle problem solved

[Justinn42]

I don't know if anyone else had this problem with the rear hatch. I took vacuum hose cut it into 4-6 inch lengths then slid them into the vent holes in the seal. I used like 8 pieces. I opened the holes a little bit with a box cutter then used some armer all to lube them up. Now there isn't any creeking or rattling. I used like half inch hose I think. It fit perfect in my 1990.

 

[GrimmJeeper]

my hatch was rattling because the rivets holding the latch in on the bottom were all torn up, due to the body flexing and twisting the crap out of the hatch. I just took mine off and tossed it