Project Geosynchronous Orbit

[eflores]

I know the math but i can tell you in my ten years of experience with those gm tbi units you really don't need as much as the calculations come to
What ecm are you using? Ebl?

 

[eflores]

Over 1200 cfm of air flow is a ton too

 

[MoparManiac]

Building the six pack air cleaner. Welded in bungs for the CCV breather and the IAT sensor.

And mounted. Running a small flex tube to the firewall and an air filter behind the console.

Got it idling mint while warm. Revs clean just have to mess with the accel enrichment and revs while under load. Also cold start and whatnot.

Slowly but surely.

 

[5spd_xj]

Next weekend is gonna suck

 

[MoparManiac]

Next weekend is gonna suck

I see what you did there.



Idles beautifully. Just have to mess a bit more with the PWM opening time.

 

[cmelo]

Clean up that wiring you should be ashamed of yourself. Whoever mounted that coil for you must have been fully retarded, what a dumb spot I hope this sets itself on fire when you drive it. This thing sucks. By the way good job.

 

[dukie564]

wow that filter is gonna be loud as ****. Good thing you won't be able to hear it over the sound of 440 glory

 

[MoparManiac]

I ran out of wire nuts so I figured I'd just use those shitty butt connectors.

And I hope the air filter sucks all the oxygen out of the passenger compartment.

 

[5spd_xj]

I ran out of wire nuts so I figured I'd just use those shitty butt connectors.

And I hope the air filter sucks all the oxygen out of the passenger compartment.

I'll start surfing craigslist for a scuba tank :thumbup:

 

[foxwar71]

I'll start surfing craigslist for a scuba tank :thumbup:

cough Mark cough

 

[ktm racer 419]

you might need hood spacers dude

 

[MoparManiac]

Think I could just run lebaron vents?

 

[cmelo]

Think I could just run lebaron vents?

What rubicon express product is that!?

 

[MoparManiac]

It's an iron rock product.

GET IT RIGHT

 

[ktm racer 419]

Think I could just run lebaron vents?

home depot has these sweet heater grate covers that work more better.

 

[Vanimal]

is that going to be a big enough intake tube and filter for that size of an engine?

 

[MoparManiac]

Calculated the filter flow out to 950 CFM. This engine would be fine with 850 CFM.

No idea on the intake tube/aircleaner setup. I figured 4" intake tube would be enough but I have no idea.

 

[Vanimal]

oh wow that looked a lot smaller than 4", didnt have much to scale it to.

 

[MoparManiac]

Oh ok :laugh:

Yeah the throttle body bases are normal carb size (5.125").

 

[Vanimal]

450hp is going to be just silly in that thing. torque has to be insane.