- Location
- Painted Hills, Indiana
That red looks familiar. Like it.
PROJECT FLIP FLOP SUPER SWAP
- Thread starter BRIANHO13
- Start date
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
Took it through carwash today at lunch to get all the grinding dust and sparycan settling dust off the rig....needs a little more seam sealer up top. Looks damn good now.
- Location
- Lafayette, IN
Seam sealer worked awesome on mine for a while, but the roof had just enough movement to crack it and leak a little bit. I'm going to put some silicone over the seam sealer since that is a little more flexible.
If you have any overspray on the paint that didn't come off in the carwash, pick up a clay bar, it will pull the overspray right off of it.
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
Yea after you told me about yours leaking I used two sandwhich plates at every penetration (I said penetration), pretty sure the water is coming in around the bolts....I figured sealing around the plates would be good enough.....
I have had no fewer than 8 people come up to me at work asking about the cage, the red definetly grabs the eye.
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
I still have carpeft and headliner, trying to keep it cool and quiet in there...
I used red RTV on the ugly trucks sunroof gasket. it's the only thing that stayed flexible and adhered. It still doesn't leak and I did that 8 years ago.
winning.
shortxjdoug
NAXJA Forum User
- Location
- Chattanooga tn
I can vouch for the no leaking.... And i heard the body twist so bad last month i thought the back window was going to fall out
frame rail folded in half probably has something to do with that.
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
Just ordered red harnesses....
Had a couple downpours today, bone dry inside jeep.
Had a couple downpours today, bone dry inside jeep.
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
Well the rear seat is too close to cage for an adult to sit in the back so I did this today.
Now there is a ton of knee room and I still have 24" behind the rear seats for wheeling gear. I can remove the seats in two minutes the way I have them mounted for when I have to carry bigger stuff.
Now there is a ton of knee room and I still have 24" behind the rear seats for wheeling gear. I can remove the seats in two minutes the way I have them mounted for when I have to carry bigger stuff.
kmanxj5050
NAXJA Forum User
- Location
- Reed City Michigan
SWEET!! How is it for head room?
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
Not bad, I'm 5'10" and my head barely touches, my wife if 5'7" she has decent head room. I have a plan to lift the head line up about an inch.
- Location
- Michigan
You can still recline if you need more head room?
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
Sure can but the stupid sound bar is there so you really have to tilt them. I have a way to get the head liner up another inch or so.
- Location
- 29°58'28.9"N 99°15'15.5"W
How is the head room for the driver.
I am told the center console gets in the way.
She much prefers a bench seat.
I am told the center console gets in the way.
She much prefers a bench seat.
BRIANHO13
<- Yum Chocolate
- Location
- Spring, TX
Smash Hole
GFY
- Location
- Smash HQ
I see what you did there 
- Location
- Lafayette, IN
Curious to see how you did this, it looks like you cut into the floor?
Where do you put your spare? Stand it up in the back or put it on the roof?
Where do you put your spare? Stand it up in the back or put it on the roof?
