kmanxj5050
NAXJA Forum User
- Location
- Reed City Michigan
Project "Constructive Deconstruction"
- Thread starter VAhasnoWAVES
- Start date
- Location
- Michigan
Re: Project "Something Awesome"
I'll take that challenge. if I lose, I won't care because I'll be drunk
I'll even take that challenge in march when Attica is covered in ice.
real men go to winterfest
I'll take that challenge. if I lose, I won't care because I'll be drunk
I'll even take that challenge in march when Attica is covered in ice.
real men go to winterfest
kmanxj5050
NAXJA Forum User
- Location
- Reed City Michigan
Re: Project "Something Awesome"
A real man trades his bounder for a 3 place gooseneck, then buys a sweet diesel tow rig and come to lake city then reed city, then attica!
A real man trades his bounder for a 3 place gooseneck, then buys a sweet diesel tow rig and come to lake city then reed city, then attica!
XJosh95
NAXJA Forum User
- Location
- Green Bay, WI
John D
NAXJA Member # 788
- Location
- Rockford, Mi
Re: Project "Something Awesome"
I'm sure he could drink you under the table on the ice too.
I'm sure he could drink you under the table on the ice too.
VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
Re: Project "Something Awesome"
fun story, floated down the manistee river this summer with a gallon jug of jungle juice. it disappeared between 3 people. buddy supposedly knew very well where we were putting in at, and getting out. supposed to be a 4 hour float. 6 HOURS later i start to recognize where we are and... we have got to be another 4 hours away. and itll be dark in an hour. got off at the bank... RAN to the upstream parking spot (because of the way the river bent, it was closer), and on the drive back to get the tubes, it was a fricken 5 mile run... barefoot. never again will i trust someone from manton.
not a fan of drinking on the ice, not even ice fishing. thats just a dumb sport.
few shots before walking to the deer stand is kind of fun though. "safety harness? check."
there is some truth to this first statement. when i was bigger (40lbs bigger) i drank a lot more. seemed it was less invasive to the body. but that might just be because the body was more efficient at buffering stuff out. then again, being a cheap date isnt a bad thing.
fun story, floated down the manistee river this summer with a gallon jug of jungle juice. it disappeared between 3 people. buddy supposedly knew very well where we were putting in at, and getting out. supposed to be a 4 hour float. 6 HOURS later i start to recognize where we are and... we have got to be another 4 hours away. and itll be dark in an hour. got off at the bank... RAN to the upstream parking spot (because of the way the river bent, it was closer), and on the drive back to get the tubes, it was a fricken 5 mile run... barefoot. never again will i trust someone from manton.
if you lose, your still winning.
true statement. but you got to remember, that puts us out of your "real man" area.
why do you think they called adult league busch league or beer league... what do you think was in the water bottle.
not a fan of drinking on the ice, not even ice fishing. thats just a dumb sport.
few shots before walking to the deer stand is kind of fun though. "safety harness? check."
Last edited:
- Location
- NE Indiana
Re: Project "Something Awesome"
I'lll drink you under the table on the ice if necessary...
if necessary...on ice skates...
mac 'including winterfest' gyvr
I'lll drink you under the table on the ice if necessary...
if necessary...on ice skates...
mac 'including winterfest' gyvr
- Location
- Michigan
Re: Project "Something Awesome"
he won't show up to winterfest. I think he wears figure skates while on the ice
he won't show up to winterfest. I think he wears figure skates while on the ice
VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
Re: Project "Something Awesome"
i see whats going on here...
if i show up at WF, whos going to volunteer to hold my hand the whole time? i need a "big brother"
i see whats going on here...
if i show up at WF, whos going to volunteer to hold my hand the whole time? i need a "big brother"
John D
NAXJA Member # 788
- Location
- Rockford, Mi
Re: Project "Something Awesome"
You'll get one if you show up, I think they have plans for you...
You'll get one if you show up, I think they have plans for you...
kmanxj5050
NAXJA Forum User
- Location
- Reed City Michigan
Re: Project "Something Awesome"
Can I choose a big brother if I go? Preferably none of the older fellas who've posted in the last couple pages
Can I choose a big brother if I go? Preferably none of the older fellas who've posted in the last couple pages
- Location
- Michigan
Re: Project "Something Awesome"
I will make sure you are somebodys bitch.
Can I choose a big brother if I go? Preferably none of the older fellas who've posted in the last couple pages
I will make sure you are somebodys bitch.
kmanxj5050
NAXJA Forum User
- Location
- Reed City Michigan
Re: Project "Something Awesome"
Better than christmas!
I will make sure you are somebodys bitch.
Better than christmas!
VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
Re: Project "Something Awesome"
didnt know you were into that kind of thing K.
didnt know you were into that kind of thing K.
VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
Re: Project "Something Awesome"
thought these were cool, found some pictures of my old jeep. pity i had to get rid of it. i miss the 4.7 stroker the most. bought it off of a MWC guy actually, when i was still in Va.
even made it to hatteras:
thought these were cool, found some pictures of my old jeep. pity i had to get rid of it. i miss the 4.7 stroker the most. bought it off of a MWC guy actually, when i was still in Va.
even made it to hatteras:
VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
Re: Project "Something Awesome"
little bit of an update, got the priorities arranged again.
(BOLD = have)
(GREEN = installed)
Front:
- Lunchbox Locker
- Pinion Bearing/Seal
- Control Arm Drop Brackets
- Coil Spacer/ACOS
Rear:
- Rear Disks
- SYE
- Drive Shaft
- Shackle Relocation Brackets
Tires:
- Moabs
- 245/75/R16 MTRs
- 285/75/R16 Duratracs (32" tires will put my speedo gear dead on again with the 3.55s)
- Wheel Spacers
- 35s (for wheeling, on separate rims)
Extras:
- Finish Rear Bumper
- Redo Bed liner
- Mains Cable Upgrade
- Fog Lights
- Highlift
- Finish OBA
- Fiber Glass Fenders
- Bilstein Shocks
i know there is something im forgetting... not much to report in the jeep world. all my focus has been on school and the lady. got a MET exam later today that im going to destroy.
oh... i guess i have been doing other things that school and my girl friend.
http://www.facebook.com/photo.php?v=133537900085840
DOODLES!
little bit of an update, got the priorities arranged again.
(BOLD = have)
(GREEN = installed)
Front:
- Lunchbox Locker
- Pinion Bearing/Seal
- Control Arm Drop Brackets
- Coil Spacer/ACOS
Rear:
- Rear Disks
- SYE
- Drive Shaft
- Shackle Relocation Brackets
Tires:
- Moabs
- 245/75/R16 MTRs
- 285/75/R16 Duratracs (32" tires will put my speedo gear dead on again with the 3.55s)
- Wheel Spacers
- 35s (for wheeling, on separate rims)
Extras:
- Finish Rear Bumper
- Redo Bed liner
- Mains Cable Upgrade
- Fog Lights
- Highlift
- Finish OBA
- Fiber Glass Fenders
- Bilstein Shocks
i know there is something im forgetting... not much to report in the jeep world. all my focus has been on school and the lady. got a MET exam later today that im going to destroy.
oh... i guess i have been doing other things that school and my girl friend.
http://www.facebook.com/photo.php?v=133537900085840
DOODLES!
VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
Re: Project "Something Awesome"
been on a (an attempted) selling binge lately to try and pick up some 35s. i think ill be happier (in the long run, lol) if i pass. one good thing though,
i think i finally got rid of my D30 housing. trading for a new ZJ tie rod. decent deal IMO. ive got a whole other set of steering, and i got a lifetime warranty on all of my TREs when i replaced them. im going to take my stock TREs in tomorrow and see if i can swindle spares. so it looks like i may have a COMPLETELY new set of spare steering, as well as a 3rd tie rod. do i need it? no... but good to have spares. lol.
also, got to pull the shafts from my old 8.25 for spares, and possibly start a disk upgrade. fun, fun.
JY tomorrow after if i get up early enough, after before the pasts store to see if i can pick up a front drive shaft, i want to do a SYE before going to R&V this weekend with Kman. i think the price went up since i looked last, which was early in the summer. im undecided on if i want to do the U-joints or not, last time i accidentally lost needles in the centering ball. that was a $50 mistake.
hunting tomorrow... morning and evening as well. busy day. lol.
happy thanksgiving.
been on a (an attempted) selling binge lately to try and pick up some 35s. i think ill be happier (in the long run, lol) if i pass. one good thing though,
i think i finally got rid of my D30 housing. trading for a new ZJ tie rod. decent deal IMO. ive got a whole other set of steering, and i got a lifetime warranty on all of my TREs when i replaced them. im going to take my stock TREs in tomorrow and see if i can swindle spares. so it looks like i may have a COMPLETELY new set of spare steering, as well as a 3rd tie rod. do i need it? no... but good to have spares. lol.
also, got to pull the shafts from my old 8.25 for spares, and possibly start a disk upgrade. fun, fun.
JY tomorrow after if i get up early enough, after before the pasts store to see if i can pick up a front drive shaft, i want to do a SYE before going to R&V this weekend with Kman. i think the price went up since i looked last, which was early in the summer. im undecided on if i want to do the U-joints or not, last time i accidentally lost needles in the centering ball. that was a $50 mistake.
hunting tomorrow... morning and evening as well. busy day. lol.
happy thanksgiving.
VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
Re: Project "Something Awesome"
rocks and valleys!
went with Kman, was a good time. not many pictures. but the rockers did great.
a couple notes, tire carrier need to be higher:
bumper corners need to be tapered up (larger tires would help too) and relocate license plate:
aside from size, i was actually pretty impressed with the MTRs. despite the fact that they are worn down pretty good.
rocks and valleys!
went with Kman, was a good time. not many pictures. but the rockers did great.
a couple notes, tire carrier need to be higher:
bumper corners need to be tapered up (larger tires would help too) and relocate license plate:
aside from size, i was actually pretty impressed with the MTRs. despite the fact that they are worn down pretty good.
kmanxj5050
NAXJA Forum User
- Location
- Reed City Michigan
Re: Project "Something Awesome"
The jeep did good buddy. I probably had more fun spotting/watching you.
Definitely have to do it again asap.
The jeep did good buddy. I probably had more fun spotting/watching you.
Definitely have to do it again asap.
- Location
- Michigan
