VAhasnoWAVES
NAXJA Forum User
- Location
- Lake City, Mi
Re: Project "Spring Semester Of 2011"
:new:
so, im starting to see a lot more GGGGGGGRRRRRRRREEEEEEEEEENNNNNNN on this list.
(BOLD = have)
(GREEN = installed)
Front:
- 3.55 D30
- Ball Joints
- Unit Bearings
- Coil Spacer
- Bump Stops......................................(ACOS maybe?)
- Steering...........................................(ZJ or possibly Currie, all my TREs are shot)
- Control Arm Drop Brackets
- Control Arm Bushings
- Double Sheer Bracket
- BPEs
Rear:
- Shackle Relocation Brackets
- 3.55 C8.25
- BPEs
- SYE..................................................(hack and tap style)
- Drive Shaft
Tires:
- Moabs
- 245/75R16 MTRs
- 305/70/R16 Duratracs or Destination M/Ts
Extras:
- Exhaust
- Early Model Washer Fluid Bottle
- Mains Cable Upgrade
- Redo Bed liner
- Fog Lights
- Highlift
- Front Bumper
- Finish Rear Bumper
- Rock Sliders
- Transfer Case Skid
- Quality Tow Strap And Shackles
- CB Radio
- Finish OBA
- Fiber Glass Fenders
- Bilstein Shocks
did a little research and came to the conclusion that i could reuse my RE track bar with a double sheer bracket. that will save a LOT of money. im a happy camper.
also picked up some work in detroit for an uncle for a few days. i think im going to tell HD ive got a relative who isnt doing so hot and take sick/vacation time to go do that. that way i still get a decent check from them as well. sly... i know. abusing the system? maybe. but the F'ers screw me over all the time. ill take the oportunity to make $300 in 3 days, thank you.
just skating to pass the time. trying not to splurge with the lady, and need to get 4x4 back. the clock is ticking!
:new:
so, im starting to see a lot more GGGGGGGRRRRRRRREEEEEEEEEENNNNNNN on this list.

(BOLD = have)
(GREEN = installed)
Front:
- 3.55 D30
- Ball Joints
- Unit Bearings
- Coil Spacer
- Bump Stops......................................(ACOS maybe?)
- Steering...........................................(ZJ or possibly Currie, all my TREs are shot)
- Control Arm Drop Brackets
- Control Arm Bushings
- Double Sheer Bracket
- BPEs
Rear:
- Shackle Relocation Brackets
- 3.55 C8.25
- BPEs
- SYE..................................................(hack and tap style)
- Drive Shaft
Tires:
- Moabs
- 245/75R16 MTRs
- 305/70/R16 Duratracs or Destination M/Ts
Extras:
- Exhaust
- Header
- Cat
- Muffler
- Down Pipe
- Tail Pipe
- 60mm Throttle Body- Cat
- Muffler
- Down Pipe
- Tail Pipe
- Early Model Washer Fluid Bottle
- Mains Cable Upgrade
- Redo Bed liner
- Fog Lights
- Highlift
- Front Bumper
- Finish Rear Bumper
- Rock Sliders
- Transfer Case Skid
- Quality Tow Strap And Shackles
- CB Radio
- Finish OBA
- Fiber Glass Fenders
- Bilstein Shocks
did a little research and came to the conclusion that i could reuse my RE track bar with a double sheer bracket. that will save a LOT of money. im a happy camper.
also picked up some work in detroit for an uncle for a few days. i think im going to tell HD ive got a relative who isnt doing so hot and take sick/vacation time to go do that. that way i still get a decent check from them as well. sly... i know. abusing the system? maybe. but the F'ers screw me over all the time. ill take the oportunity to make $300 in 3 days, thank you.
just skating to pass the time. trying not to splurge with the lady, and need to get 4x4 back. the clock is ticking!
Last edited: