CharlesS
NAXJA Forum User
- Location
- Quezon Province, Philippines
Approximately a year ago I installed the Griffin aluminum radiator that was offered on Quadratec. I was able to get a deal even though it was still quite pricey compared to other after market radiators.
While the installation is a tight plug and play; the upper radiator brace will need to be modified slightly to push the radiator forward to increase thermal clutch fan clearance.
After exhaustive searching.... I found that there wasn't a thermal clutch thin enough to clear the thickness of the Griffin radiator core....
I purchased a Derale steel fan and a 1.5" aluminum spacer to provide approximately 7/8" clearance.
The Griffin aluminum radiator quality is very good and provides ALOT of cooling surface.
While the installation is a tight plug and play; the upper radiator brace will need to be modified slightly to push the radiator forward to increase thermal clutch fan clearance.
After exhaustive searching.... I found that there wasn't a thermal clutch thin enough to clear the thickness of the Griffin radiator core....
I purchased a Derale steel fan and a 1.5" aluminum spacer to provide approximately 7/8" clearance.
The Griffin aluminum radiator quality is very good and provides ALOT of cooling surface.