jeepfreak1020
NAXJA Forum User
- Location
- Thornton
Ok so my steering is shot right now and its about time to upgrade. Im not going to spend the coin on a set up when I can fab my own. I have a D30 right now and it will stay in the jeep till it blows up, end of question about that. I want to go over the knuckle steering with 5/8" bolts. I wwas going to run a crossover steering type. So a full tie rod from pass to driver knuckle, and over the knuckle. I was going to get the alignment straight on with my tires, then my plan was to weld 2 tabs onto the tie rod itself, towards the pass side, as far as I can go, then burn the 2 tabs in for a drag link. Would this be ok to do? It would be pretty much just like JCR's 1 TON steering, but with heims. Pretty much the same concept though. WOuld this be ok to do, and would it still drive ok? It will be going on a DD well.
Or should I just do the same thing and keep it uonder the knuckle. It dosent really bother me to keep it under, as I have never hit my steering. I would just like to go over because you clear the diff better and can have full steering till.
Or should I just do the same thing and keep it uonder the knuckle. It dosent really bother me to keep it under, as I have never hit my steering. I would just like to go over because you clear the diff better and can have full steering till.