Otis

[XJ_Rudolph]

and put a c clamp around the jaws of the puller to keep them together

 

[JeepFreak1234]

Can I return it like this?

The Pitman atm is still stuck btw

 

[JeepFreak1234]

It's this what ur talking about

 

[XJ_Rudolph]

yea they have a lifetime warrantee, iv broken breaker bars and gotten a new ones

 

[JeepFreak1234]

Ok cool

 

[XJ_Rudolph]

get a new one first

 

[JeepFreak1234]

I have to go to work in a half hour so I'm gonna get a new puller, and I'll come back around 5:30 ish

 

[GordoSmasho]

Once its loaded up a bit. Whack the arm with a hammer. It will help break the tension. If that doesnt work a map torch should do the trick

 

[XJ_Rudolph]

Once its loaded up a bit. Whack the arm with a hammer. It will help break the tension.

Very good idea right there

 

[JeepFreak1234]

What's a map torch

 

[GordoSmasho]

Any time your using a puller that is good a good practice.

 

[XJ_Rudolph]

Map torch is just a torch that uses a gas that burns hotter than propane i think.

 

[JeepFreak1234]

Ok then I was using a map torch and a bfh. What do you mean by "loaded up"?

 

[XJ_Rudolph]

While there is pressure on the pitman arm, whack the pitman arm with the hammer

 

[JeepFreak1234]

I did. Nothing happened. Even when I hit it with the torch

 

[XJ_Rudolph]

Your guna need that impact on there

 

[JeepFreak1234]

Yep

 

[JeepFreak1234]

Only 1 hour left of work. Then ima get that piece of shi@ out

 

[JeepFreak1234]

I'd out just me or it's every reply a new thread. That's what it looks like in my feed at least

 

[JeepFreak1234]

Is it*