rysam
NAXJA Forum User
- Location
- Paradise, Ca.
I just wired in some trailer lights with the converter doohickey today. When I finished I had my daughter hit the brakes and signals so I could put a test light on the plug. turnsignals and headlights worked fine, no brakelights on my rig or at the plug. At that point all I did was check the fuses. all were good. then the turnsignals stopped working within 5 minutes. Now I have no turns and brakes on my jeep, the trailer wiring is already disco'd. tested all fuses again, nada. replaced the brakelight switch with a brand spanking new one, still the same..nothing.
the weird part is the flasher keeps clicking non-stop. no lights just clicks, It doesnt matter where the signal lever on the column is. hit the brake pedal and the clicking stops. I ran a live line from the batt all the way to the back to check the lights and they all worked with constant 12v. when i took the constant away, the brakelights worked for 3 presses of the pedal then faded away kinda like the 12v jump gave something a quick charge? im lost at this point. can anyone offer advice??
91,ax15,4.0,231,no cruise. base model. and yes I searched, most posts were check the fuses and switch, I did both.
Edit: I have no turnsignal lights on the dash anymore and the hazards are out as well.
the weird part is the flasher keeps clicking non-stop. no lights just clicks, It doesnt matter where the signal lever on the column is. hit the brake pedal and the clicking stops. I ran a live line from the batt all the way to the back to check the lights and they all worked with constant 12v. when i took the constant away, the brakelights worked for 3 presses of the pedal then faded away kinda like the 12v jump gave something a quick charge? im lost at this point. can anyone offer advice??
91,ax15,4.0,231,no cruise. base model. and yes I searched, most posts were check the fuses and switch, I did both.
Edit: I have no turnsignal lights on the dash anymore and the hazards are out as well.
Last edited: