My WTB list.

[Lurch]

Whats the aussie worth to you?

One hundred and twenty five dolla

 

[David_Bricker]

What year block? HO I assume?
Why do you think it might be low on compression? If the top end was just rebuilt it's a safe guess that the rings are toast.

Yes, HO - it out of my 1995.

The only reason I was thinking it was low on compression was because there was a hill that the engine alone, when turned off, the Jeep would creep down the hill while in gear. Unfortunately, I didn't think to do a compression test before we pulled the motor, since the decision to replace the motor had already been made.

So, yes, probably rings are getting weak. Oil pressure is still just over 40 at anything above 1000 rpm.

David Bricker / SYR

 

[NorCalChris]

Bumpity bumpity boo.


4.88s
lockers for
d30
8.8
29 spline 8.25

install kits if you got them.

Thanks guys.

 

[NorCalChris]

Bumpity bumpity boo.
4.88s for hp d30
install kits
d30 locker
led bar


Thanks guys.

 

[GrimmJeeper]

you can get all that on one invoice by PMing rwkhaussupply on here. it will probably show up the next day, too.

or you could click the link in my sig. you're not going to beat his prices or service :cheers:

 

[NorCalChris]

I'll be in SoCal this weekend. Currently looking for a good set of Goodyear Mt/R-K In the 37x12.5R17 flavor or bigger. Must be for 17's.
Bilstein 7100 shocks or better. 10-14 inch
Tcase skid or belly pan
Rcvs or other shafts for a d30
Ruffstuff cover for a d44
Shock mounts to weld to an axle.

 

[NorCalChris]

Currently looking for a good set of Goodyear Mt/R-K In the 37x12.5R17 flavor or bigger. Must be for 17's.
Bilstein 7100 shocks or better. 10-14 inch
Tcase skid or belly pan
Rcvs or other shafts for a d30
Ruffstuff cover for a d44
Shock mounts to weld to an axle
Race Radio
Upper quarter panel guards
2 wheel adapters 5x4.5-5x5.5

 

[NorCalChris]

Currently looking for a good set of Goodyear Mt/R-K In the 37x12.5R17 flavor or bigger. Must be for 17's.
Bilstein 7100 shocks or similar. 10-14 inch I'd even consider a pair of 2.5's.
Tcase skid or belly pan
Rcvs or other shafts for a d30
Ruffstuff cover for a d44
Shock mounts to weld to an axle
Race Radio
Upper quarter panel guards
2 wheel adapters 5x4.5-5x5.5
Boomerang Shackles

 

[Vanimal]

Interested in a set of Toyo mt's in 37x13.5x37? About a year old. Average rock rash. $1k.

 

[NorCalChris]

Interested in a set of Toyo mt's in 37x13.5x37? About a year old. Average rock rash. $1k.

idk, how much rock rash? Im looking at a set of 4 new mtr's for not much more then 1k.

 

[Vanimal]

idk, how much rock rash? Im looking at a set of 4 new mtr's for not much more then 1k.

That's a killer deal, i'd probably do that. They were 1700-1800 when i got mine.

 

[NorCalChris]

That's a killer deal, i'd probably do that. They were 1700-1800 when i got mine.

If this other deal falls through, Ill hit you up. Thanks Dan.

 

[Vanimal]

If this other deal falls through, Ill hit you up. Thanks Dan.

no prob. Yea, hit me up and i can get some pics.

 

[NorCalChris]

Bilstein 7100 shocks or similar. 10-14 inch I'd even consider a pair of 2.5's.
Tcase skid or belly pan
Rcvs or other shafts for a d30
Ruffstuff cover for a d44
Shock mounts to weld to an axle
Race Radio
Upper quarter panel guards
2 wheel adapters 5x4.5-5x5.5
Boomerang Shackles

 

[NorCalChris]

bilstein 7100 shocks or similar. 10-12 inch I'd even consider a pair of 2.5's.
Tcase skid or belly pan
Rcvs or other shafts for a d30
Ruffstuff cover for a d44
Shock mounts to weld to an axle
Race Radio
Upper quarter panel guards
2 wheel adapters 5x4.5-5x5.5
Boomerang Shackles
(1) 37x 12.5R 17 Goodyear Mtr Kevlar in decent condition.

 

[NorCalChris]

updated list

DynaMat or FatMatt like material
97+ front clip and doors
Tcase skid or belly pan
Dana 30 shafts
Ruffstuff cover for a d44
Shock mounts to weld to an axle
Race Radio Vehicle mounted and Hendhelds
Upper quarter panel guards
Boomerang Shackles
(1) 37x 12.5R 17 Goodyear Mtr Kevlar in decent condition

 

[Brendan_91XJ]

I have a roughstuff diff guard for the D44, goes over the cover.
Wont work on my D44 as it covers the fill plug.
Come by next time you are in the area and I will walk you through my JY.

 

[NorCalChris]

I have a roughstuff diff guard for the D44, goes over the cover.
Wont work on my D44 as it covers the fill plug.
Come by next time you are in the area and I will walk you through my JY.

Sounds good buddy. Ill let you know next time Im down there. Are you going to go to SoCalFest? If so could you bring it?

 

[Brendan_91XJ]

No, that is the same weekend as the Silver State 300

 

[NorCalChris]

No, that is the same weekend as the Silver State 300

ok, well unless someone coming can grab it from you, Ill just have to wait until Im down in your area again.