Ukraine Train
NAXJA Forum User
- Location
- Cleveland
I started out by modifiying the stock end links to use a removable pin but the studs broke when I tried removing the nuts from the top. So today I made these. The 5/8" rod ends are overkill but I had them handy, though I had to turn down the lower pin where it goes through the axle bracket to 1/2".
installed
I eventually want to put the sway bar back up to the factory location on the frame so I'll just have to extend the threaded rod holding the two rod ends together.
installed
I eventually want to put the sway bar back up to the factory location on the frame so I'll just have to extend the threaded rod holding the two rod ends together.