Low Profile Shackle Relocators

I have seen other versions and these look the best I think and the reason is that these dont even add lift to your ride. I am definitely going to get some of these. I have been running the RC drop brackets in the front and they are awesome. Makes my ride way better and this will do the same.
 
These look like a brilliant idea... so is a longer shackle still recommended with these like it is with the other shackle relocators on the market; or will a stock shackle work just as well? I've read that with the RC and HDORE versions of these a stock shackle will limit compression unless you trim off part of the relocation bracket.

I'm running a bastard pack with stock shackles and the angle is horrible; but I want to avoid having my shackles hanging low under the back bumper, I
 
Matt Phillips and one of our other customers on Cherokeeforum are running stock shackles without issue. We made these things with enough clearance that shackle movement upon compression wont be hindered. A longer shackle might help improve your flex even more as it swings through a bigger arc, but fixing your shackle angle is definitely the first step.
 
Redrider2911 have you or do you know if the version 2 of these are already out and what is the timeframe to get some of these? Is it still 2-3 weeks to get some?
 
We ordered 7 of version one, they all sold before we could get them made. Then we ordered 7 of version 2, they also all sold before we could get them made. lol Those 7 are shipping out mid next week. We have one more revision on these to make them an absolute perfect fit, then we will be ordering 10 more for inventory. So yes, we will be out about 3 weeks to ship those next 10. Good news is we will also be able to offer nut strips with the next orders!

Kris Froehlich
 
Yes, you cut out the upper stock mount like the writeups show.
 
I'm sorry, but I'm going to ask that this thread be canned. It is unfair to the Vendors who DO support this Forum and this Club for a manufacture to use it to hawk their wares. If you want to hawk your stuff for free, please go elsewhere and do it.
 
These are better and ship INSTANTLY (practically). Surprised how fast I got them.

http://www.naxja.org/forum/showthread.php?t=1065577

I put them on and combined them with the 1st version that they had and it is really beefy, I would not want to cut off the stock hangers and only rely on the hitch mounting points with all that force twisting and rocking.
 
WB9YZU said:
I'm sorry, but I'm going to ask that this thread be canned. It is unfair to the Vendors who DO support this Forum and this Club for a manufacture to use it to hawk their wares. If you want to hawk your stuff for free, please go elsewhere and do it.
Click to expand...

Its fine with me if you guys want to close the thread. I didnt do anything wrong though. I didnt start the thread and I wasnt promoting any of my products myself. A user asked a question. And I answered it as another user. There was another question asked, so I answered it. I didnt even link our website.
 
Mtb Jak said:
These are better and ship INSTANTLY (practically). Surprised how fast I got them.

http://www.naxja.org/forum/showthread.php?t=1065577

I put them on and combined them with the 1st version that they had and it is really beefy, I would not want to cut off the stock hangers and only rely on the hitch mounting points with all that force twisting and rocking.
Click to expand...

They dont rely on only the hitch mounting points. They also bolt through the stock shackle weld nut and I assure you that they will withstand any abuse you throw at them

VAhasnoWAVES said:
keep in mind that as you reduce the angle of your shackle, your going to lose height.
Click to expand...

Yes, you can slightly lose lift from where you are currently at; but you will actually be bringing the back end back down to the advertised height for the leaf springs. The reason most lifts end up alot higher in the rear than in the front is because the shackles are verticle when they aren't supposed to be.
 
Last edited:
I need these badly. Will you ship to Canada? USPS would be my prefered method as I never seem to pay brokerage fees when it comes across.

WB9YZU said:
I'm sorry, but I'm going to ask that this thread be canned. It is unfair to the Vendors who DO support this Forum and this Club for a manufacture to use it to hawk their wares. If you want to hawk your stuff for free, please go elsewhere and do it.
Click to expand...

I appreciate it when a vendor answers other peoples questions about their products. Please don't can this thread just because a non-supporting vendor is posting responses.
 
Yes we can ship to canada. And there is no problem shipping through USPS. Shoot me an email a [email protected] and we can manually enter in your order. We gotta do some work on our website and shipping calculator.

Kris
 
Kris your a very good guy but can you please get a membership on here so it's fair to the rest of the venders?
 
You must log in or register to reply here.

Similar threads

S
96 xj diesel swap
Replies
7
Views
332
silverpearljku
S
J
No start, no crank, no power, rough idle, new battery, new starter, new IAC.....
Replies
4
Views
388
Unclewolverine
U
S
No start and shorted/melted connections inside overhead console.
Replies
7
Views
335
Tim_MN
Tim_MN
FaultyLine
Good XJ Driver Seat recommendation?
Replies
13
Views
438
GSequoia
GSequoia
B
Long Arm
Replies
2
Views
369
maxbraketorque
M
Back
Top