basalt51
NAXJA Member #761
- Location
- Woodland, CA
I need to clear out my garage and side yard. Come get this stuff (Woodland). Will not ship!!!
'97 4.0 - lost compression on #1 a few years ago and I just swapped another engine in. You can have the stand too. I have all the lifters/rods kept in order as well. No valve cover, no oil pan. It had about 100k miles before I took it out. There was nothing else wrong with it. I toyed with the idea of stroking it but I don't have the time or money. It might only need new rings and to have the cylinder honed - dunno. I need it gone! Head is off, have gasket. Been in my garage the whole time.
http://sites.google.com/site/jtbpics/_/rsrc/1252352225781/home/IMG_0227.JPG
http://sites.google.com/site/jtbpics/_/rsrc/1252352230681/home/IMG_0229.JPG
http://sites.google.com/site/jtbpics/_/rsrc/1252352235946/home/IMG_0230.JPG
4.11 Ford 9" Ring and Pinion. Came out of my axle when I had it re-geared. threads on pinion don't look good otherwise in decent condition.Thats about all I know about it:
'97 front and rear bumpers. Front end caps. Dirty from sittin out but should clean up well.
D35 spares- 2 long, 2 short, and a lockright type locker. I bought them as spares for my dad but he has a 44 now and the lockright never got in. Lockright should be for stock TJ gearing - 3.55 and down?
Never even looked at the lockright and one set of shafts:
'97 4.0 - lost compression on #1 a few years ago and I just swapped another engine in. You can have the stand too. I have all the lifters/rods kept in order as well. No valve cover, no oil pan. It had about 100k miles before I took it out. There was nothing else wrong with it. I toyed with the idea of stroking it but I don't have the time or money. It might only need new rings and to have the cylinder honed - dunno. I need it gone! Head is off, have gasket. Been in my garage the whole time.
http://sites.google.com/site/jtbpics/_/rsrc/1252352225781/home/IMG_0227.JPG
http://sites.google.com/site/jtbpics/_/rsrc/1252352230681/home/IMG_0229.JPG
http://sites.google.com/site/jtbpics/_/rsrc/1252352235946/home/IMG_0230.JPG
4.11 Ford 9" Ring and Pinion. Came out of my axle when I had it re-geared. threads on pinion don't look good otherwise in decent condition.Thats about all I know about it:
'97 front and rear bumpers. Front end caps. Dirty from sittin out but should clean up well.
D35 spares- 2 long, 2 short, and a lockright type locker. I bought them as spares for my dad but he has a 44 now and the lockright never got in. Lockright should be for stock TJ gearing - 3.55 and down?
Never even looked at the lockright and one set of shafts:
Last edited: