JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
89TrailXJ said:
Thanks, I used 1.25 OD .250 wall DOM and Chevy 1 ton TREs. The hi steer arms are from Rock Equipment in Lincoln, CA.
Billy
Long arms/full width done *pics*
- Thread starter JeepFreak21
- Start date
Thanks, I used 1.25 OD .250 wall DOM and Chevy 1 ton TREs. The hi steer arms are from Rock Equipment in Lincoln, CA.
Billy
- Location
- Birmingham, AL
What D44 did you use, Waggy?
JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
ZachMan said:
No, it's a heavy duty 44 from a '76 f-250... you may also search under my name and keyword "brackets" to see a closeup of those brackets before I put them on. I know you were looking for ideas.
Thanks,
Billy
Big Red
NAXJA Forum User
- Location
- Roscoe, IL 61073
Looks good Billy. I know that with a little tweaking here and there you will be happy with your setup for years to come. What width were those axles 69" WMS to WMS or 65"? Are you going to run some wide flares to keep the cops of your back?
JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
steinjeep said:
Thanks! The rear is 65.5" and the front is 68.5" WMS to WMS. I'm going to run some removable mud flaps and hopefully that'll be sufficient.
Billy
XJZ
NAXJA Forum User
- Location
- SF Bay Area
Looks great Billy.
But the bright colored arms are going to negate your camo paint!!
But the bright colored arms are going to negate your camo paint!!
- Location
- West Sacramento, CA
It's not camo, it's cow! Looking good Billy, can't wait for the snow run.
XJZ
NAXJA Forum User
- Location
- SF Bay Area
Phil Weeks said:
My bad!! I didn't recognize the "Holstien" pattern!!
JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
mad maXJ said:
I'm talking to Jess at HighAngleDriveline right now
JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
Phil Weeks said:
I prefere cowmo
I'm looking forward to the snow too!Billy
BMP_Racing
NAXJA Forum User
- Location
- Iowa
Nice work Freak! The yellow really stands out and makes the arms look twice as long.
Brad
Brad
- Location
- West Sacramento, CA
Hey Billy, how about a picture of the whole Jeep now? Let us see what it looks like overall. Or do we have to wait until it's not on cement?
JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
Phil Weeks said:
Here's some pictures of the forklift flex test I did today...
.
.
.
.
.
.
.
.
.
.
Looks like it'll be a success after I get my High Angle Driveline
Billy
Last edited:
BrettM
NAXJA Forum User
- Location
- michifornia
what's HAD going to do? put a CV on the axle end?
that's some crazy forward bow on the coils, do you anticipate any problems?
oh, and nice shocks :laugh3:
PS: you can get 4 14 or 15 inch travel ES9000 shocks from Summit right now for a few dollars over a hundred.
that's some crazy forward bow on the coils, do you anticipate any problems?
oh, and nice shocks :laugh3:
PS: you can get 4 14 or 15 inch travel ES9000 shocks from Summit right now for a few dollars over a hundred.
Economos
NAXJA Forum User
- Location
- Coastal NC
mad maXJ said:
That is pretty wild; any ill effects from what you can tell so far? Other than that, it looks really good; clean.
JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
mad maXJ said:
Yeah, CV joint at both ends. The coils are angled, but they're not going anywhere and I cut and rewelded the bumpstop so that they wouldn't bind. Got the shock mounts done this evening
Billy
JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
Economos said:
Eh... as you can see, it doesn't look scary on the stuffed or drooped side when it's fully flexed, and it doesn't ride wierd or anything. The way I see it, it's only going to decrease the resale value of my coils :laugh2:
Billy
JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
XmikeJ said:
They're 1 ton Chevy TREs.
Thanks,
Billy
andyr354
NAXJA Forum User
- Location
- North Central KS
Looks good. givin me Ideas.
