99SJ_Ex
NAXJA Forum User
- Location
- La Crosse, WI
Rev is still working on it, possibly by the end of the weekend, we'll know.
Leaders?
- Thread starter Rev Den
- Start date
Rev Den
NAXJA Forum User
- Location
- Plainfield, IL
Rev Den
NAXJA Forum User
- Location
- Plainfield, IL
Member..............Duty
89 Eliminator.......Lead Hard
99SJ EX.............Lead Green
Big Hank.............Lead Green
Bloose...............Orange Lead
Chettacheez.......Tech
DoWorkXJ...........Tech
Flex...................Lead Green
ILLXJ.................Rev's Run Gun
Polar Jeep..........Tech
Ram Rod............Gun Green
Rev...................Rev's Run Lead
vt98xj................Orange Gun
Here you go.
Thanks all. As you can see we have an abundance of help on Green so we may run 2 or 3 groups depending on demand.
I would like to have another leader for orange, just in case we get slammed.
Rev
89 Eliminator.......Lead Hard
99SJ EX.............Lead Green
Big Hank.............Lead Green
Bloose...............Orange Lead
Chettacheez.......Tech
DoWorkXJ...........Tech
Flex...................Lead Green
ILLXJ.................Rev's Run Gun
Polar Jeep..........Tech
Ram Rod............Gun Green
Rev...................Rev's Run Lead
vt98xj................Orange Gun
Here you go.
Thanks all. As you can see we have an abundance of help on Green so we may run 2 or 3 groups depending on demand.
I would like to have another leader for orange, just in case we get slammed.
Rev
Last edited:
- Location
- Columbus, In
Big Hank is my gunner, Rev. I may not be bringing the Jeep, which I really hope isn't the case but I have a bad noise coming from the front axle. I guess I can try green in the Neon!
I can gun for Wade on hard if you need me too...
- Location
- Columbus, In
Both.
99SJ_Ex
NAXJA Forum User
- Location
- La Crosse, WI
Rev goes both days, the 'Insane' run I think you're thinking of is Mission Impossible which is not running this year.
Aaron Double check you got the bearing caps back on and get a dial-style torque wrench and check the load on the pinion bear. Two most common noises after a re-gear... Might as well run a pattern check as well...
89eliminator
NAXJA Forum User
- Location
- Delphi, IN
- Location
- Clarkdale, AZ
POLAR_JEEP_04
NAXJA Forum User
- Location
- Ohio
sounds good to me
whoever is in my group, be ready for a fun time
Like
RAM-ROD
NAXJA Forum User
- Location
- Libertyville IL
Like the Idea of three possible Green runs....Lets not get these groups to big....
99SJ_Ex
NAXJA Forum User
- Location
- La Crosse, WI
Only downside is how are we going to break up the trail? One from the beginning, one from the quarry, one from ???
RAM-ROD
NAXJA Forum User
- Location
- Libertyville IL
I do not see that as a big of a problem as with the huge groups we tent to sit on one place a ton. I think groups under ten rigs is great 5 or less even better. we can take thre groups all at the same time with a tiny break between them one group has a problem... if they are getting it sorted out.... the other two groups can keep moving....
Just an Idea....
99SJ_Ex
NAXJA Forum User
- Location
- La Crosse, WI
Suppose that does make sense...
Are there build requirements or suggestions for each group? My rig is growing and trying to figure out where I fit. It will be my first outing with the new axles, so a little shake down may not be a bad idea and I will be getting into new territory. Any suggestions? I am going from 33s locked/open to 37 iroks welded/spooled. I think I will only be able to make it saturday so should I jump straight into hard or go orange then find someone in the afternoon to take me down hard?
- Location
- Southern Indiana
Just run with the hard group! B-)
RAM-ROD
NAXJA Forum User
- Location
- Libertyville IL
89eliminator
NAXJA Forum User
- Location
- Delphi, IN
i would like my group to have at least 33s and one axle locked. i will make exceptions if necessary.
Cool. That makes me feel better. Hard group here I come I guess.
