Karma 2010!!!!!!!!!!!!!!

[ocean_jet]

If they are shorter than an auto front DS, I'll take one..


E

They look to be about 31'-34' center of u-joint to center of u-joint.

 

[ocean_jet]

fender liners?

Yeah... you want 'em?

 

[souske]

No thanks, mine became a dirt guard for the feed chain on my old drill rig.

Just trying to help clarify.

 

[Ghostrider]

Stock LCA's for a 2001 XJ
Stock front & rear bumpers w/rear rocker pieces
Front bumper mounts
125' of 5/16" steel winch cable + steel rollers from my roller fairlead
35" tube TV (Toshiba)

Come get 'em if you want 'em!

 

[WebDog]

I have two front drive shafts.

Ill take the other one if you still have it.

 

[HeepSpeed]

Stock LCA's for a 2001 XJ
Stock front & rear bumpers w/rear rocker pieces
Front bumper mounts
125' of 5/16" steel winch cable + steel rollers from my roller fairlead
35" tube TV (Toshiba)

Come get 'em if you want 'em!

I'll take the cable and rocker pieces! You come north anytime?

 

[GrimmJeeper]

I can grab em and hang on to em for you if you want Garrett.

 

[Mike L]

Stock front & rear bumpers w/rear rocker pieces
Front bumper mounts

What color are the bumpers?

 

[ocean_jet]

Front Drive Shafts are 31" to 34" center to center (not 31 to 34 feet as in my other post).


Dibs order:
1 - E (Monkey55)
2 - cracker
3 - WebDog

Let me know if you guys want them.

 

[HeepSpeed]

I can grab em and hang on to em for you if you want Garrett.

Thanks Mike! That would be great. We'll trade up when I get that tranny mount to you.

 

[cracker]

Front Drive Shafts are 31" to 34" center to center (not 31 to 34 feet as in my other post).


Dibs order:
1 - E (Monkey55)
2 - cracker
3 - WebDog

Let me know if you guys want them.

I want it still.

E lives near by so you can send them my way with Carol or Mike Finch or even Troy if you see him.

Thanks a ton!

 

[WebDog]

Dana 35 non c clip complete with 10" brakes newish drums and shoes, missing spider gears.

Take it soon or it is going to the junker.

 

[Ghostrider]

Bumpers are red, as are the rocker pieces. I don't get up to Marina much but the stuff has been taking up space in my garage for 8 years now.... You just want the plastic, not the bumpers, right?


Stock LCA's for a 2001 XJ
Stock front & rear bumpers w/rear rocker pieces
Front bumper mounts
125' of 5/16" steel winch cable + steel rollers from my roller fairlead
35" tube TV (Toshiba)

And I just found a front driveshaft (thought I'd already given it away!). Fits 2001 XJ, NP@42, LP D30.

 

[WebDog]

And I just found a front driveshaft (thought I'd already given it away!). Fits 2001 XJ, NP@42, LP D30.

Ill take the driveshaft

 

[Ghostrider]

OK, gone are
Driveshaft (Webdog)
Rocker Pieces (Garrett/Heepspeed)
Winch cable (Garrett)

Remaining:
Stock LCA's for a 2001 XJ
Stock front & rear bumpers
Front bumper mounts
steel rollers from my roller fairlead
35" tube TV (Toshiba)

 

[ocean_jet]

I want it still.

E lives near by so you can send them my way with Carol or Mike Finch or even Troy if you see him.

Thanks a ton!

Will do... you're welcome.

 

[jeeperjohn]

I have a renix manifold with throttle body that was trained to me by Homebrew but I forgot who is supposed to get it:dunno: Who's is it?

 

[homebrew]

Dennis or some other guy that lives by Dennis.

 

[Johnnie Walker]

OK, gone are
Driveshaft (Webdog)
Rocker Pieces (Garrett/Heepspeed)
Winch cable (Garrett)

Remaining:
Stock LCA's for a 2001 XJ
Stock front & rear bumpers
Front bumper mounts
steel rollers from my roller fairlead
35" tube TV (Toshiba)

How are the bushings on the LCA's?
Do you have any hardware for the bumper mounts or just the mounts themselves?

 

[Ghostrider]

Bushings are near new (<10K miles on them). Limited bolts for the mounts- I have 4 torx screws that are in them now. May have the other bolts around someplace but I suspect I re-used them.