Karma 2010!!!!!!!!!!!!!!

[Wiser]

I have a 21 spline aw4 w. Tcm and torque converter. Needs shift solenoids. The pan dipstick filler tube is broken. Come and get it before I recycle it. I pulled the pan and the fluid was clean

 

[2stix]

I have a 21 spline aw4 w. Tcm and torque converter. Needs shift solenoids. The pan dipstick filler tube is broken. Come and get it before I recycle it. I pulled the pan and the fluid was clean

what happened to the solenoids? did the trans work good before you took it out? i need a 21 spline aw4. so im almost sure i will come get this.

 

[PhotographerMike]

need to clear out my garage

renix exhaust manifold

I'd like this one! Any chance it could join the parts train to Garden Grove?

Thanks, Mike

 

[toyotawrench]

tcm?

 

[Wiser]

tcm?

Transmission control module

 

[Wiser]

what happened to the solenoids? did the trans work good before you took it out? i need a 21 spline aw4. so im almost sure i will come get this.

I swapped the solenoids to my aw4 to see if it would fix my OD problem and it didn't, so the solenoids do work. Far as I know it was pulled from a jeep that was running the day the trans got pulled. Come get this !

 

[homebrew]

Need the karma gods help to build the new jeep ITS COSTING A LOT LOL.

Got a president brand CB radio good working condition, I was going to put it in the new jeep but its the size of an 80's VCR (J/K kinda) want something a little more compact.

 

[DesertRunner]

homebrew you have pm

 

[Cowboydoc]

http://www.mallcrawlin.com/forum/showthread.php?t=21959
NOT trying to get in trouble here, but this feller is giving away V8 ZJ steering parts. Might help somebody...

 

[soopergoober]

My Jeep. Well, my parts jeep anyways. Used this flopped 98 xj classic for my 4wd conversion and parting it out is just taking to long and I've already recouped most of the cost in buying it. Motor and trans are gone. "Frame" is still straight. Body and roof not so much. Has a good 29 spline 8.25 and I can put a slightly bent 2wd beam in the front to make it a roller again. PM me for details. I just want it gone before city code enforcement slaps me with a fine.

 

[HeepSpeed]

are 8.25 shafts prone to breaking? I'd be down to pull the shafts to have as spares! Are you going to SocalFest?

 

[JohnX]

I'll take that steel wheel if it can get trained to Big Bear.

 

[homebrew]

whats left of the interior

 

[soopergoober]

Sorry guys, at this point I need to keep it a roller so it can get the hell out of here. Its sort of all or nothing at this point. Not trying to be anal, just hoping somebody here takes it before I'm forced to cut it up and take it in for scrap.

 

[homebrew]

I'll take that steel wheel if it can get trained to Big Bear.

John I have a steelie that you can have, just got to take the tire thats wrapped around it. I'll be in big bear jeep gods willing.

 

[soopergoober]

whats left of the interior

Seats and most interior trim are dirty, but still there. Carpet and headliner are shot. Enought is there to convert a pre 97 dash/console to a 97+.

 

[DesertRunner]

spacer has been picked up and is in my passenger seat waiting on info from you!

dropped spacer off yesterday on the way to disneyland!

 

[skull_black]

thnx now i gotta install it =)

 

[jeprovo]

Three - 265/75-R16 Dunlop Radial Rovers 10-20% tread.

 

[JohnX]

I have D35 toothpicks if anyone needs spares. Came from a 94 clip style with abs.

Also have a cover for same d35