JCR transfer case skid, short arms, drop brackets, etc

[rocknxj]

I'll be in Rocklin on the weekend of 13 Feb. I have a sweet JCR TC skid that came off my '99 as well as upper and lower short arms and drop brackets from the RE 6200 5.5" lift.

I also have one good leaf from the same lift and one leaf with a busted main spring.

I also have a rear cargo mat. It has slots cut in it for passing the stock tie downs through the mat. It's functional and I used it for years.

I've got a few other odds and ends like stock sway bar end links, Daystar poly bump stops, and a few other items cluttering the garage.

PM me if interested.

 

[blondejoncherokee]

Might be interested in the skid for the mj

 

[Goose_XJ88]

I might be interested in the Leafs and cargo mat.. Any pics of the mat?

EDIT: also might be interested in "few other pieces of clutter" lol My clutter could always use new friends.. lol

 

[831_xj]

How much for the uppers?

 

[rocknxj]

I'll post pics and very reasonable prices soon.

 

[goodwilljeeper]

already pm'd you for the matt

 

[KTMqdracer]

Get my pm?

 

[rocknxj]

Sorry guys work has been hectic and I haven't been able do much with these parts.

Ill clean up the parts and send price info to you today via PM.

 

[rocknxj]

JCR transfer case skid plate. Purchased for $139.00. Will sell for $50 with hardware. I've often considered this one of the best parts of my XJ.

Rubicon Express drop brackets from the 6200 short arm lift. They have taken a beating over the years, but a fresh coat of paint will make them purty. Not sure of the going rate, but asking $100. Hardware included.

Rubicon Express control arms from 6200 short arm lift kit. Upper and Lower control arms available. Upper arms are in very good condition. Lower arms have taken abuse but are straight. Lower sides (not shown) have rock rash from NorCal's favorite runs. Suggest changing bushings, but they are in decent condition. Make an offer for these.

Stock cross member in good shape. 10 bucks.

As mentioned in the original post, I have one good RE 6200 leaf from the 5.5" RE lift, and one leaf with a busted main. Make offer. No real photo other than this...

Here's the last time these parts were in use ha ha ha. They served me well.

 

[rocknxj]

I'll be in Rocklin Fri-Mon of this week (13-16 Feb) and can bring them and leave them with my kid if interested. Otherwise, I'll sell them in SoCal. Let me know if you are able to meet up.

 

[blondejoncherokee]

I already pmd you about the skid just doubling up again.

 

[rocknxj]

I already pmd you about the skid just doubling up again.

I PM'd to your PM. I'll bring the skid to Rocklin this weekend.

 

[Goose_XJ88]

Any pics or price on the cargo mat? I'm still interested in that.

 

[rocknxj]

Skid is sold.

 

[goodwilljeeper]

no longer interested in matt. interest in uppers and the stock cross member. PM Sent

 

[goodwilljeeper]

wait realized the uppers might be too long since I'm on a 3.5 inch lift. but member still interested

 

[blondejoncherokee]

I can pickup parts for sac guys from kelly and store them if anyone cant get down here this weekend for parts.

 

[goodwilljeeper]

I can pickup parts for sac guys from kelly and store them if anyone cant get down here this weekend for parts.

:wave:

 

[Johnnie Walker]

wait realized the uppers might be too long since I'm on a 3.5 inch lift. but member still interested

Uppers will be fine for you. CAD brackets for 4.5-5.5 lift require approx stock length arms. So these UCA's are plug n pray.

I might be interested if you decide against them.

 

[rocknxj]

Ill bring my stuff and organize pickup later as needed. Ill bring my cargo mat and 8.25 carrier and 4.56 ring gear also. Anybody need daystar bump stops or a stock proportioning brake valve?