Iron Scorpion Bumper Kit???

Well like I said, if it's cars your worried about, don't be. The mass of this bumper alone will destroy any sheetmetal on another car. Mine after being fully welded, herculined, and with shackles weighs 52 lbs. I believe the stock one is around 8-12 lbs? If your worried about slow speed collisions, like say up to 25mph, it should be fine. Anything higher than that and your entire car is gonna be hurting, not just the bumper/front uniframe.
 
DanMan2k06 said:
Well like I said, if it's cars your worried about, don't be. The mass of this bumper alone will destroy any sheetmetal on another car. Mine after being fully welded, herculined, and with shackles weighs 52 lbs. I believe the stock one is around 8-12 lbs? If your worried about slow speed collisions, like say up to 25mph, it should be fine. Anything higher than that and your entire car is gonna be hurting, not just the bumper/front uniframe.
Click to expand...

Well thats all fine and dandy... but what about the car I hit with this Monster of a bumper? Imagine... wouldnt this do more damage to the people in the vehicle than the stock one with the shock impact points? Gosh... when I get my new bumper I hope no stopid driver gets in my way....
 
I'm pretty sure that in any highspeed collision its not going to matter wether you have a hard core bumper or a piece of "Schedule 80 PVC pipe(TM)" up there you're going to cause almost the same amount of damage to another vehicle. tho you may save yourself some damage but not likly... Just try not to wreck! Period! If you're that worried about it I may suggest a refrigirator box filled with 'Great Stuff' or 'Fishe Foam' on the front of your Jeep, It's EXTRA coushy!

NOW back to the actual topic! Have either of you guys got pics of the bumper installed yet?
 
lowrange2 said:
I'm pretty sure that in any highspeed collision its not going to matter wether you have a hard core bumper or a piece of "Schedule 80 PVC pipe(TM)" up there you're going to cause almost the same amount of damage to another vehicle. tho you may save yourself some damage but not likly... Just try not to wreck! Period! If you're that worried about it I may suggest a refrigirator box filled with 'Great Stuff' or 'Fishe Foam' on the front of your Jeep, It's EXTRA coushy!
Click to expand...

Ah-Hem...
IMG_0518.jpg


Sorry to high jack pic, I just had to... Now it's even better at impact than stock!
 
LMAo! Thats great! I tired this! BUT got NO appreciation! :(

Sorry I must have skipped over the 3rd page and didnt see the finished pics!

S5300007.jpg
 
Last edited:
lowrange2 said:
Great huh!? I wish I could find time to work on my bumper!
Click to expand...

Lowrange..mine is done, go back a few pages..I'm finished, and it's mounted.....I beat dan :laugh2: he still has his lights to mount, my 500's are one, and so is my plate bracket.

Justin
 
Any one else start one one of these yet? if so, take some pictures

Dan, I will take a few of mine completed with my lights, and my license plate mount too.

JUstin
 
I'm building one as well. Man there sure is a lot of welding involved. Unfortunately, the wife doesn't give me time to play anymore, so I've been sneaking out for like 20 minutes a day to run some beads here and there. Hopefully i'll have it finished this weekend. I'll post some pics later on.
 
ok, here are the last of mine....with the lights, And for legality reasons...my front plate....


Justin
DSC05151.jpg


DSC05145.jpg


apraoch angle...for those that wan to see it
DSC05156.jpg


and last but not least..as promised( berofe the server crash) the hitch mounter clay pidgeon launcher.....minus the actual launcher...I need to fix it slightly, but the rest is there. The seat is leather, the top pivots so there is three positions, and three angles of launch
DSC05143.jpg
 
HAHAHA that launcher is SWEET! The bumper amazing as well. Got any of the passenger side? The more I see of yours, the more motivated I am to sand mine back down.
 
I like the smooth look with all the welds ground down but for myself, I like the look of good welds layed out on things. I am seriously thinking of buying one of these after the mounts are improved and getting my bro, who is a pro welder, to lay down some sweet beads on it.
 
jeeperjohn said:
I like the smooth look with all the welds ground down but for myself, I like the look of good welds layed out on things. I am seriously thinking of buying one of these after the mounts are improved and getting my bro, who is a pro welder, to lay down some sweet beads on it.
Click to expand...

John, you saw mine....tack it up, and bring it over to me...I'll weld it up for you....

Justin
 
Stupid question time.

When removing my old bumper, there is a canister on the passenger side bumper. didn't notice it when pulling and the air line disconnected from under the hood somewhere. So the question is, what is this bubble and where did it connect to? Also, do I really need it or should I try and mount someplace else?

Will have pics of my finished bumper later today. Need to give it a top coat of paint.
 
You must log in or register to reply here.

Similar threads

P
ARB bumper question
Replies
3
Views
214
Paradiddle
P
DZRTANK
Time to sell. What should I ask for it?
Replies
12
Views
1K
lesslimited
lesslimited
P
Some basic mod questions
Replies
14
Views
697
Goose_XJ88
Goose_XJ88
DZRTANK
1988 Jeep Cherokee XJ 4x4 Stroker 4.6l Auto w/ Lift and Armor - $6,500 (Chino Valley, AZ)
Replies
5
Views
332
DZRTANK
DZRTANK
W
AAL kit; Input Please
Replies
5
Views
308
Wander Motor
W
Back
Top