Introduce yourself

My mane is Josh and I'm in the Coast Guard. I'm stationed in Maine but will be moving to Florida in a couple of weeks. I have a 4dr 1999 XJ Sport. What I've done to my XJ so far is to enhance it's towing ability: K&N Precharger, Air-raid throttle body spacer an HD leaf springs. Right now my Jeep takes my toys to the water. As soon as I get a second vehicle and can take the baby seats out of the Jeep, it will become a toy too.
jeep.jpg
 
Hello All,
I'm John and I live in Mont Vernon NH.......yes Mont....not Mount..
I'm on my 4 th XJ and I trade them in with 300,000+ on the OD, I'm at approx. 292,000 on my 2001 Cherokee Sport. I have a 2 in. BB with JKS adjustable disco's and JKS adjustable track bar, K&N air filter, rack, jack, shovel, and 31's......I have 4in rear leafs ready to go. I'm saving for 3.5 adjustabe jks front spacers.
I'm looking for some nice trails and sand pit type areas to hit in New Hampshire......If any body has some NH spots, maybe we could start a new thread and get a NH event set up!!! Hope to meet up and fling some mud!!
 
hi im Jeremy from windber pa...small town near johnstown
bought the xj in hopes of a more capable rig and to eliminate having trail damage to my ram

ended up buyin 2 xjs a rolled 92 4 dr with lift on it and a 93 2dr with some minor bodywork needed after a few weekends of work i have this

93 2 door 4.0 ho 5 speed
dana 30 front will be trussed and aussied within a week or 2 custom reinforced cover and alloy seals (tryin to get a set of 4340s)
8.25 rear with detroit alloy usa shafts custom reinforced cover
tweaked rc 6.5 kit netting roughly 7 ...might go up another 2 if i can get the tires i want so i have to use the bigger axles
34x10.50 ltbs on american racing daytonas...eventually may be boggers on a set of ar diamondbacks i got for free
slip yoke eliminator with woods shaft
i built both bumpers and doin rock sliders soon
hacked fenders with bushwacker cutouts
fixed drivers seat with 4pt harness
wired front/rear for my multimount ramsey 9500
uniden pc68xl cb with 4 ft firestik
engine driven sanden on board air with 7 gal tank and homemade tool/storage box
still a few things i gotta install but definately comin together

STA70293.jpg


STA70294.jpg
 
Last edited:
Hey Jeep cj/xj...I live up here in the White Mountain region in Campton. If you ever get up this way get off at exit #28 (off I93) and head into Waterville Valley. On the way in there is a road called Sandwich Notch Rd, a seasonal rd, but there are old logging roads on it to explore. If you follow it out all the way you come to Center Sandwich, if it looks familiar(depending on your age) it the is opening shot for the old Newhart Show, the one where he owned an inn in VT.
If you kept heading into waterville Valley ((Rte. 49) you'll come across some other roads worth checking out( you'll see them cut off the main rd.) Turn up towards the ski area(well marked) there is another seasonal road, Tripoli Rd, it runs thru the White Mountain National Forest and will bring you back out to Rte#93 at exit #31. There are some places to explore on this rd. too, NO OFFROADING in the Natl. Forest, but there are some legal side roads to check out.
 
Hi everybody, my name is Jeremy and I live in Montgomery County, Maryland. Im 24 and my day job is a Jaguar Technician. I've been into cars pretty much my whole life and lately I have been very interested in offroading. I traded a guy on craigslist my truck for a 96 Cherokee with a 4.0/AW4/NP231 with D30 and D35 axles. As of now, it sits with 31 inch tires and a budget 2" lift. My plans are to give it a 4.5 inch lift and 33's and probably swap the D35 for a Chrysler 8.25. Im pretty excited to get into this new hobby and look forward to meeting some of you.

DSC00127.jpg


IMG%5D
 
igotanxj said:
Hi everybody, my name is Jeremy and I live in Montgomery County, Maryland. Im 24 and my day job is a Jaguar Technician. I've been into cars pretty much my whole life and lately I have been very interested in offroading. I traded a guy on craigslist my truck for a 96 Cherokee with a 4.0/AW4/NP231 with D30 and D35 axles. As of now, it sits with 31 inch tires and a budget 2" lift. My plans are to give it a 4.5 inch lift and 33's and probably swap the D35 for a Chrysler 8.25. Im pretty excited to get into this new hobby and look forward to meeting some of you.

DSC00127.jpg


IMG%5D
Click to expand...

Welcome!!! Nice Jeep too by the way. Make sure you do plenty of research before you buy a lift and tires. NAXJA and Google are you best friends in this department.
 
hi my names john and im a hvac guy i just got my first jeep last month a 1998 cherokee classic planning on 3 inch with 31s so im trying to figure out how to get her ready for the trails oh and i live in columbus ohio
 
Hello I'm Karl Campbell from Lancaster County PA. This is my 98 XJ w/ 4.5 inches of lift on 33 BFG's with some other stuff as well. Just started building it and need to get a lot of work done for the summer (sye trimming and gears are at the top of the list). Great forum by the way w/ alot of sick XJ's here.

33s001.jpg
 
hey. im mike im originally from Gettysburg PA, but till august im stuck here in Nashville Tn where im going to NADC to be a diesel/equipment mechanic. my jeep is a 93 sport 4.0, aw4, 30/8.25, i think its a 242? 235/75/15 on some 50$ aluminum wheels. bone stock except for a high flow cat and a jegs 2.5 exhaust i replaced after i lost my old exhaust in a mudhole. gettin ready for a 1 3/4 spacer in the mail. btw wheres all the South central pa guys????
ill add a link to my pics of me and my roomate 4wheelin here in tn. the yota has 3 in body with 33s http://viewmorepics.myspace.com/index.cfm?fuseaction=user.viewPicture&friendID=241314795&albumId=814534
 
New Guy Intro......

I put up a post on the tech forum before I saw this: I live on Long Island, NY
2000 XJ, 3" Rough Country w/ stabilizer, old Pirelli's, Coleman roof rack with homemade tool and jack mounts.
Most wheeling done on the beach, but have been on 2 Jamboree's.

IMG_0059.jpg


.
 
Re: New Guy Intro......

SID'S Garage said:
I put up a post on the tech forum before I saw this: I live on Long Island, NY
2000 XJ, 3" Rough Country w/ stabilizer, old Pirelli's, Coleman roof rack with homemade tool and jack mounts.
Most wheeling done on the beach, but have been on 2 Jamboree's.

IMG_0059.jpg


.
Click to expand...
How do you like that roof rack? And it looks like you stuffed two more OEM roof racks under it...pretty good idea, actually.
 
massscene said:
Hi, I'm Matt from Beverly, MA. I have a 96 XJ with 3" rustys lift, 31's and flowmaster Exhaust. Need some spots to go wheelin...
attachment.php
Click to expand...

Hi, that's the same suspension setup I started with. What do you have on your Jeep for a grill guard? Is that stock? You can answer and send pics to my PM if you wouldn't mind.
 
Afternoon guys and gals. well I took a year off from wheeling, so I figured I should post here.I use to know alot of you guys here but, I'm sure there are many new faces so I'm Eric and heres my XJ :-)

Wheelin3copy.jpg


TNT Customs long arms, 35" BFG Krawlers and other goodies such as 4.56's Aussie front locker, detroit rear locker, yukon rear shafts, alloy usa front shafts, and a 4.7 stroker
 
You must log in or register to reply here.

Similar threads

X
The great white boat Project
Replies
7
Views
2K
XJ McLovin
X
A
My Green Eyed Lady Project...and me!
Replies
11
Views
1K
altrocker1
A
O
Do you know this XJ?
2
Replies
22
Views
1K
in4aride
in4aride
Hellbent
'96 2 door 5sp 4.0 4x4 - $1600
Replies
3
Views
612
Hellbent
Hellbent
X
Trade Built XJ for 99-02 WJ
Replies
1
Views
219
xjrbw
X
Back
Top