cruiser54
NAXJA Forum User
- Location
- Prescott, Az
+2 on the BG. Unless you have a Renix with the original injectors. Those are bad and tend to leak externally where the later models don't.
Injectors?
- Thread starter Alboy97XJ
- Start date
+2 on the BG. Unless you have a Renix with the original injectors. Those are bad and tend to leak externally where the later models don't.
SanDiegoOverland
NAXJA Forum User
- Location
- San Diego
So, on that precisioninjectors.com website. The injectors for my 1992 HO are listed as being the same as Renix-era injectors from 87-on. Is that correct?
Is my year prone to leakage? I'm trying to troubleshoot poor mileage, long crank, and a nasty exhaust smell.
Injectors are one thing I thought I'd check once I test my fuel pressure at the rail. (got to find a tool for that, too)
Is my year prone to leakage? I'm trying to troubleshoot poor mileage, long crank, and a nasty exhaust smell.
Injectors are one thing I thought I'd check once I test my fuel pressure at the rail. (got to find a tool for that, too)
MaxxXJ
NAXJA Forum User
- Location
- Bakersfield CA
Look over this thread, a lot of good info was given to me for what your looking for
http://www.naxja.org/forum/showthread.php?t=1093932
SanDiegoOverland
NAXJA Forum User
- Location
- San Diego
I actually read thru that thread already.Mine's not a renix rig. Do those fixes apply to my year? I didnt see any indication that they do or do not.
cruiser54
NAXJA Forum User
- Location
- Prescott, Az
The ground at the dipstick tube stud does, as does the line to the MAP sensor.
SanDiegoOverland
NAXJA Forum User
- Location
- San Diego
eace:
- Location
- Virginia City, NV
I wish some one would do a chart or something with per year and and stroked or stock motors. Looking through all this info. Is confusing for most non injector savy people's.
