Important

Still rockin' the BlackBerry. Whatever.
 
I have a Motorola like Zack used on "Saved By The Bell"......still trying to reach Jesse Spano for that blowey she owes me
 
I use GasTracker on my iphone4. I had already been using the Fuelly website for 6 months before I got a smartphone, and it syncs with the same data I had.
 
well...i think the wife and i officially decided already to move out of this apartment after a year. we've started looking at houses just outside of where we live...commute would be just a hair longer, but the train line puts us closer to work than the buses. as it sits its a .5 mile walk to the bus and a .7 mile walk to work from the bus station...in the 90 degree heat, it was brutal. melissa and i both work on 7th ave 6 blocks apart. she works at 35th and 7th and i work at 29th and 7th. it works really well, we see each other at lunches and even ride the bus together sometimes. the train we would take would arrive at 7th ave and 33rd street. right now my commute to work is about 25 minutes of walking and about 20-30 of bus riding. it can take longer if the traffic is bad. the train commute is 50-70 minutes depending on which train you take...so in all honesty the trade off isnt bad. we just want to buy a house next year. we both like our jobs, so for now we are going to stay out east. we will just be settling somewhere more family friendly where we can have some land and a garage. operation save-a-lot is now in order...(of course there is a budget for truck and jeep parts built into operation saves a-lot)
 
I was just looking back through WF09 pics.....man there were a lot more stockers back then!
 
TGIM, thank god its Monday. i need some rest.
 
DoWorkXJ said:
Rockauto?
Click to expand...

I'm going to get my timken wheel bearings there though! $66 plus finding a discount code online for them is easy.
 
POLAR_JEEP_04 said:
Where can I get nut strips to instal a hitch on my zj?
Click to expand...


Make them?

Thats what I always do. I take a 1" wide strip, drill holes matching the hitch, cut the back out above the little hole on the jeep, put the strip in there, bolt hitch up loosely with nuts, stick MIG gun in there and tack, pull them out and weld them, install hitch.

A ZJ maybe different but I've done this on 3 XJ's
 
kmanxj5050 said:
Make them?

Thats what I always do. I take a 1" wide strip, drill holes matching the hitch, cut the back out above the little hole on the jeep, put the strip in there, bolt hitch up loosely with nuts, stick MIG gun in there and tack, pull them out and weld them, install hitch.

A ZJ maybe different but I've done this on 3 XJ's
Click to expand...

Seems like a lot if bs for something that I should be able to get somewhere for a 20 spot.
 
kmanxj5050 said:
How much is the shipping though? I have found Rock auto only saves me a few bucks everytime I've looked into them, plus I have to wait.
Click to expand...

66 per hub through RA or 107 plus tax at auto zone. I need two. So I don't think shipping will be $80 or even the $40 I'd save on one bearing.
 
kmanxj5050 said:
Im cheap. I'd rather use the 20 for beer.
Click to expand...

Buy the time I go get a strip of metal and nuts then fire up the welder Ill prob have 20 wrapped up in it. But I have no clue what they actually cost anyways. And I can't wait until WF for someone else to install it for me.
 
You must log in or register to reply here.

Similar threads

1
New here, but not to Jeeps
Replies
1
Views
58
macgyvr
macgyvr
C
Delete my info
Replies
3
Views
123
Numbers
Numbers
A
Power window issues, all 4 were working but no longer
Replies
5
Views
272
maxbraketorque
M
S
Troubleshooting electric door locks on a 98
Replies
1
Views
187
SurplusFan98
S
Bent
The BEST Medicine
Replies
7
Views
193
Nimrod
Nimrod
Back
Top