Important

Not sure, apparently the guy that sold it to me on eBay stripped the serial and model numbers on it...makes me think it may be a bit warm in other ways now :rolleyes:....It has ran about 200 pounds of cheese through it w/ no problems over the past few years, so I think we are safe...but thank you for your concern....I know it was not concern for me, but rather for the nacho machine. :D
 
Not sure, apparently the guy that sold it to me on eBay stripped the serial and model numbers on it...makes me think it may be a bit warm in other ways now :rolleyes:....It has ran about 200 pounds of cheese through it w/ no problems over the past few years, so I think we are safe...but thank you for your concern....I know it was not concern for me, but rather for the nacho machine. :D

The cheese dispenser shall remain a WF staple! :yelclap:
 
that is right, she is modeled after an inline 6.....she just keeps on preforming no matter the circumstances :D
 
Dang, both of ours are on the list. I'll see what the repair kit is- probably something simple. I tend to think most mechanically inclined types would notice THUNK THUNK THUNK THUNK zZZZZZT <fire>. :gee: But what do I know?
 
Dang, both of ours are on the list. I'll see what the repair kit is- probably something simple. I tend to think most mechanically inclined types would notice THUNK THUNK THUNK THUNK zZZZZZT <fire>. :gee: But what do I know?



After spending significant time with a convenience store manager.. you would be surprised how much they would miss. I asked her if she had a nacho machine in her store... she couldn't remember.
 
I keep saying nothing they do (or don't) would surprise me... and they find a new surprise for me. I had to wipe poop off the toilet seat last night. We have no male employees. WTH? Only one is married, and another has been married. The rest are young and single. I need to tell them that they'll have to do better than that if they want to wear a ring.

Our bachelor/party pad didn't get torn up like that. Damn.
 
I have no welding skill, but from what I've heard about welding to the unibody maybe that worked better for me. I just laid down sheet metal, hammered it into the right shape, then RTVed and riveted it in place before bedlining it. Probably was the most solid part of the Jeep.

I bought some cheep knock off floorboards from ebay, they were close but still had to cut and beat them in (but a nice thick gauge metal). i used rivets, spot welds, and stitch welding...still had 10 to 12 hours in them in two days...

gonna try to seal it tommorrow...er later today...

mac 'not a body man' gyvr
 
The cheese dispenser shall remain a WF staple! :yelclap:
And wouldn't be somehow fitting if it burst into flames around midnight.
New WF tradition: hot flaming cheese campfire. :cheers:
 
If the cheese machine was to burst into flames...I wouldn't want it to be anywhere else! :D
 
And wouldn't be somehow fitting if it burst into flames around midnight.
New WF tradition: hot flaming cheese campfire. :cheers:
Attica Times

23 hospitalized after flaming cheese incident at local campground

...

Authorities have issued an arrest warrant for one suspect who goes by the alias "Cheese Man." He has been charged with cheesy negligence in the third degree.
 
:cheers::flame::wierd:

:looney::laugh::roflmao::laugh::looney:

That should be submitted to The Onion News lol
 
Attica Times

23 hospitalized after flaming cheese incident at local campground

...

Authorities have issued an arrest warrant for one suspect who goes by the alias "Cheese Man." He has been charged with cheesy negligence in the third degree.

And in other news, Winnebago has recalled all large RVs due to a design flaw. It seems the fiberglass sides are susceptible to being melted by 500* nacho cheese.
 
Not really looking forward to tomorrow. The Jeep finally needs some attention, might be a long day of wrenching if it decides to be as big a brat as it normally is. Taking rear axle apart to swap to disks because as long as I have it apart for fixing a stripped wheel stud I might as well do that too. And I really needed to fix the stripped stud because I need to rotate the tires. Also hoping the wandering I've been getting but ignoring can be fixed with a Toe adjustment rather than what I'm dreading as far as maybe needing ball joints and tre's.
 
Hey steeler fans, Make sure your terrible towel is clean cause ...

You'll need it to wipe away the tears .:D

Nick

Go Bengals! WHO-DEY!!!
 
Hey steeler fans, Make sure your terrible towel is clean cause ...

You'll need it to wipe away the tears .:D

Nick

Go Bengals! WHO-DEY!!!

NIck, I think the steelers are gonna mop the floor with the Bengals! :D
 
Bring it on my friend....

I like this trash talkin' thang.;)

Nick

Go Bengals! WHO-DEY!!!


Actually I HATE the Steelers more than the bengals so , Go Bengals and most importantly GO COLTS! :D
 
Back
Top