Important

I have one with 3.55s and LSD I would like to get rid of. All new drum brake stuff too, just needs e-brake cables since I was lazy and cut them. Shoot me a PM and let me know what it's worth to you. Coincidentally I will be in Bremen this weekend, so I could even do delivery.

Comes with U-bolts too, only used once! Let's see if we can get that argument started again. :)
While you're in town, stop by my old man's place and redeem your prize from atop the fridge.
 
You will love them.

I know I will... My trip to SD ate the air-soft bbs I had in the tires when I aired down... Going to make the students vacuum those out and install these.

Now to finish designing my d30 truss, cut it out on the CNC Plasma and get the new 30 under the heep.


99SJ 'Project on top of project here' Ex
 
I have Ho Bags Balls in a box on my work bench :)
 
That bling locker is worth it though. Zip or arb? I can't remember what you have. I'll have close to that in my 44 but that's with a air locker and RCVs but then I'll have to buy new wheels for the 5x5.5
 
The thing is, we are a club that the newest vehicle we idolize is 13 years old. The ultra 4 guys make ifs kick ass. I think its simply the future, and it will work.

Ifs works good for go fast stuff. Ifs works good for ultra 4 because they do a lot of go fast stuff plus some slow stuff. Ifs does not work as good as solid axles if you are building a rock jeep.

If this was the case Toyota guys would not be spending the big bucks to convert their ifs rigs to solid axles. They already have one of the better IFS systems on the market. If it's such a great system why do they throw it away when they build anything larger than an expo rig?

If jeep goes independent suspension Will they make lifts for them? Ya. Will they work? Ya. Will they work as good in the rocks as a CJ, XJ, YJ, ZJ, WJ, TJ or JK? Not an effin chance.
 
Since its such a big deal ATM I'm posting in the *IMPORTANT* Thread...


OFFICERS:
Each office shall be held for a term of 2 years, appointments, delegates and committee positions may be held by any member, whether an officer or not.
Copies of these Bylaws will be held by each member of the BOD and posted on the internet at WWW.MIDWESTXJ.ORG.
A minimum of 1 year membership is required before election to an office can be made.

The President shall preside over all membership and BOD meetings, be present at all events when possible, be the executive officer and have the duty to carry out the policies and decisions of the chapter and co-sign checks as necessary. The elected President is the Chairman of the Board, and will preside over all Chapter Board of Directors activities. The President will also be the Chapter Representative to the BOD on NAXJA unless he appoints another NAXJA MWC BOD member.

The Vice President shall have knowledge of all Chapter activities. The Vice President shall also be prepared to assume the duties of the President or any other officer in their absence.

The Treasurer shall have the care and custody of all Club funds. The Treasurer may be directed by the remaining directors as to the method, and facility of depositing such funds. He shall collect and disburse all money on account of the Club. He shall keep records and accounting of the financial affairs and report their status as directed by the Board of Directors. He shall sign such contracts, documents or instruments in writing as required, and shall have such other powers and duties as may be assigned from time to time by the Board of Directors or as incident to his office. On or before the 7th day of each month, he/she shall present an itemized list of moneys both spent and received in the previous month.

There will be five Officers: President, Vice President, Treasurer, Recorder, and Director. The decision making authority rank flows in order as listed above, with the President possessing the highest level. This authority rank is only applicable in decision-making circumstances where a Board of Directors vote is not feasible, such as during an event.
 
With all this time on your hands Austin, why don't you put your about me thread together, seeing nominations close in 9 1/2 hours.

I am, I forgot we have a modified schedule today for state-testing and that all happens in core classes, I have the afternoon as a large 'prep' period aka ordering parts for tomorrows jobs.
 
Ifs works good for go fast stuff. Ifs works good for ultra 4 because they do a lot of go fast stuff plus some slow stuff. Ifs does not work as good as solid axles if you are building a rock jeep.

If this was the case Toyota guys would not be spending the big bucks to convert their ifs rigs to solid axles. They already have one of the better IFS systems on the market. If it's such a great system why do they throw it away when they build anything larger than an expo rig?

If jeep goes independent suspension Will they make lifts for them? Ya. Will they work? Ya. Will they work as good in the rocks as a CJ, XJ, YJ, ZJ, WJ, TJ or JK? Not an effin chance.

I sometimes wonder if there's a way to build an IFS setup to work well on the rocks... I can think of a few ways, but not sure how to implement them.
 
I sometimes wonder if there's a way to build an IFS setup to work well on the rocks... I can think of a few ways, but not sure how to implement them.
shannon cambells IFS buggy seems to do just fine in the rocks... :dunno: IFS crawlers are for the guys who have more money than they know what to do with. i think the cost of fabbing a properly working IFS rock rig is FAR greater than a solid axle rig. add into the headache of building around an existing frame? ya... that sucks.

a lot like our SAE baja cars, i feel like i see the IFS guys bouncing off of the rocks more than crawling them with stupid amounts of flex.


2Fiddy has a D50 :(

89"needs a 60"Laredo
your fine. you havnt even broken a 30.
 
Wouldn't that be a ttb setup?

not always... could be A-arms with CVs. we run a transaxle but it could easily be done with a differential.

SAE baja... ive been playing with IFS too much lately.
541476_761142817234370_2091573066_n.jpg
 
Last edited:
Since its such a big deal ATM I'm posting in the *IMPORTANT* Thread...


OFFICERS:
Each office shall be held for a term of 2 years, appointments, delegates and committee positions may be held by any member, whether an officer or not.
Copies of these Bylaws will be held by each member of the BOD and posted on the internet at WWW.MIDWESTXJ.ORG.
A minimum of 1 year membership is required before election to an office can be made.

The President shall preside over all membership and BOD meetings, be present at all events when possible, be the executive officer and have the duty to carry out the policies and decisions of the chapter and co-sign checks as necessary. The elected President is the Chairman of the Board, and will preside over all Chapter Board of Directors activities. The President will also be the Chapter Representative to the BOD on NAXJA unless he appoints another NAXJA MWC BOD member.

The Vice President shall have knowledge of all Chapter activities. The Vice President shall also be prepared to assume the duties of the President or any other officer in their absence.

The Treasurer shall have the care and custody of all Club funds. The Treasurer may be directed by the remaining directors as to the method, and facility of depositing such funds. He shall collect and disburse all money on account of the Club. He shall keep records and accounting of the financial affairs and report their status as directed by the Board of Directors. He shall sign such contracts, documents or instruments in writing as required, and shall have such other powers and duties as may be assigned from time to time by the Board of Directors or as incident to his office. On or before the 7th day of each month, he/she shall present an itemized list of moneys both spent and received in the previous month.

There will be five Officers: President, Vice President, Treasurer, Recorder, and Director. The decision making authority rank flows in order as listed above, with the President possessing the highest level. This authority rank is only applicable in decision-making circumstances where a Board of Directors vote is not feasible, such as during an event.

What are the job descriptions of the recorder and director on the chapter level?

Seems like you all are trying to slam on me for wanting to create that and have yet to provide me with the information. :conceited
 
What are the job descriptions of the recorder and director on the chapter level?

Seems like you all are trying to slam on me for wanting to create that and have yet to provide me with the information. :conceited

Sorry Kman, thats all I could find on positions...
 
Back
Top